Stereo Professional Cutting Head and System
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Re: Stereo Professional Cutting Head and System
Now.... I open your brain.
Re: Stereo Professional Cutting Head and System
Also, the photos you present are not your work, but the work of a person who knows his stuff and has a lot of recorders, so?
https://www.youtube.com/watch?v=Zh-HUjdR_Gs
Tech Story: Making Vinyl Records With DIY Cutting Lathe (Self-Built Dubplate Machine & Studio)
Here's a video about this man talking about his job.
You tricked me, buddy!
Last edited by zdenek on Sat Jan 24, 2026 7:17 pm, edited 1 time in total.
Re: Stereo Professional Cutting Head and System
Re: Stereo Professional Cutting Head and System
Here's a video about this man talking about his job.https://www.youtube.com/watch?v=Zh-HUjdR_Gsrubenr wrote: ↑Sat Jan 24, 2026 7:17 pmI m very precise on my text. Ask to dubmono.
One think you dont have any idea about measures are needed to make a precisión coil?
You tricked me, buddy!
I'm not talking to you Re: Stereo Professional Cutting Head and System
Walk please, take puré air.zdenek wrote: ↑Sat Jan 24, 2026 7:19 pmHere's a video about this man talking about his job.https://www.youtube.com/watch?v=Zh-HUjdR_Gs
You tricked me, buddy!
You do not have the required permissions to view the files attached to this post.
Re: Stereo Professional Cutting Head and System
You posted a scan from this movie, were you trying to trick me? Are you kidding?rubenr wrote: ↑Sat Jan 24, 2026 7:22 pmWalk please, take puré air.zdenek wrote: ↑Sat Jan 24, 2026 7:19 pmHere's a video about this man talking about his job.https://www.youtube.com/watch?v=Zh-HUjdR_Gs
You tricked me, buddy!
You do not have the required permissions to view the files attached to this post.
Re: Stereo Professional Cutting Head and System
You might consider consulting a psychologist who also understands CAD; that way, you could share the measurements with everyone who is willing to help altruistically.
Time to come back to cutting room. Be safe, be precise, be serius.
Cheers!
Time to come back to cutting room. Be safe, be precise, be serius.
Cheers!
Re: Stereo Professional Cutting Head and System
You posted someone else's scan and claim it's your work?
I've lost trust in you. Find another storyteller...
You do not have the required permissions to view the files attached to this post.
Re: Stereo Professional Cutting Head and System
Good luck and don't cheat, it's a waste of life and health....
Re: Stereo Professional Cutting Head and System
You do not have the required permissions to view the files attached to this post.
Re: Stereo Professional Cutting Head and System
https://www.youtube.com/watch?v=Zh-HUjdR_Gs
Were you supposed to go to the pressing plant or someone else? What are you still doing here?
There's a photo of it at sek 0:54 , 10:29, so don't lie any more because it doesn't make any sense....
Re: Stereo Professional Cutting Head and System
If anyone has precision machinery to make head closure housings (this is the 30mm dimension, aluminum alloy), please contact me publicly. I'll commission 200 pieces for no more than $5 each.
You do not have the required permissions to view the files attached to this post.
Re: Stereo Professional Cutting Head and System
I've seen this kind of promise before, comrade, the kind you made me. Do it without promises and without fanfare, otherwise you'll just be a troll... Best regards and good luck to you...
Re: Stereo Professional Cutting Head and System
One present for your profile photo! With all my heart 
You do not have the required permissions to view the files attached to this post.
Re: Stereo Professional Cutting Head and System
It's obvious you didn't deserve it...comrade...
you were supposed to donate $20 for me to the President of TSSOLT and you didn't donate, buddy...
Last edited by zdenek on Sun Jan 25, 2026 9:43 am, edited 1 time in total.
Re: Stereo Professional Cutting Head and System
Look, trolls, and learn! I took this photo of the inside of this head so you can see how a professional 9mm voice coil is made. I'm showing you so no one will rip you off with a head from car speakers, because it's a waste of $3,000... on cat poop... 
You do not have the required permissions to view the files attached to this post.
Re: Stereo Professional Cutting Head and System
Pretty! Looks like a vinilum? The red one ?, and 3000 to waste in which head?
Re: Stereo Professional Cutting Head and System
...It was already nice...
Now it has to be correct, good or bad, so it is as it should be.
They delivered 200 pieces of feedback coil bodies [$3 each].
I decided to weigh the bodies, and they weigh 30mg [0.03g], which is next to nothing, the same as the original ones. The dimensions are also very precisely polished.Now I'm sending the bodies for factory winding, about 2 weeks
video https://www.youtube.com/watch?v=cluC8-zm9t0
Now it has to be correct, good or bad, so it is as it should be.
They delivered 200 pieces of feedback coil bodies [$3 each].
I decided to weigh the bodies, and they weigh 30mg [0.03g], which is next to nothing, the same as the original ones. The dimensions are also very precisely polished.Now I'm sending the bodies for factory winding, about 2 weeks
video https://www.youtube.com/watch?v=cluC8-zm9t0
You do not have the required permissions to view the files attached to this post.
Re: Stereo Professional Cutting Head and System
To be perfectly honest, I didn't understand why you wanted me to make a donation in your name , and I wanted to see if you would keep your word or use me to troll. Perhaps I was too suspicious, perhaps I was right.zdenek wrote: ↑Sun Jan 25, 2026 9:27 amIt's obvious you didn't deserve it...comrade...