WANTED - SCULLY/WESTREX PARTS

[Cutterwoller]

Hi All,

Wondering if anyone can help me with some parts. I am looking for the following:

- Swarf pipe for a Westrex 3D head
- Head mount for the 3D onto a Scully machine
- Scully vacuum platter (I have the older non vacuum, looking to upgrade).
- 3D head connector (not the head side, the cable side (female connector).
- Depth adjustment handle for Scully machine (my current one has been broken at some point in the past)

Any help is much appreciated.

Cheers, Lewis (London).

[pandapolar]

by head mount do you mean this???

[Cutterwoller]

Thanks for the quick reply.

The part I am talking about is the assembly that bolts to the lathe (with 4 screws) and holds the part that you photographed. When I mount my 3D in my Scully, it seems to low and fouls the platter. This is why I am thinking I may need a later style head mount? See photo..

Scully 1.JPG

Scully 3.JPG

[petermontg]

Is it the entire suspension unit you are searching for??

The suspension height is adjustable.
Can you give us more info about this fouling scenario.

I know someone who will take your current suspension.
There is also someone here who can make you an entire new suspension

Some of your missing parts will need to machined. Not that hard just will take time.
The swarf pipe for westrex might be hard to come across.
For connection check your pins and find appropriate XLR

[Cutterwoller]

Dear Peter,

Yes, it is the whole suspension unit Im looking for as my current one (in pictures) is the wrong type.

Do you have one?

Cheers, Lewis

[petermontg]

I will send you a pm

[tubefan]

Do you mean that you need the chip tube that mounts on the 3D head? Len at hrsrecords.com has those, and can also make them I believe.

[chris king]

lewis I think I have all the parts you need.. say hello to your dad from me. I need a lyrec motor have you got one

chris king