Cutting Engineer Wanted- Nashville
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Cutting Engineer Wanted- Nashville
Not sure where to post this, so if needs to be moved please let me know:
I own an all analog recording studio in Nashville, TN aptly named "Welcome To 1979". We're adding a lacquer cutting room in the coming months and are looking for an experienced cutter to head up the lacquer cutting duties. I have been talking with a few people; but wanted to explore all potential options before making a final decision.
If you are, or know someone who may be interested in such a position please email me at chris (at) welcometo1979 (dot) com
You can learn more about the studio at http://www.welcometo1979.com and/or http://www.facebook.com/welcometo1979
Thanks in advance,
Chris Mara
I own an all analog recording studio in Nashville, TN aptly named "Welcome To 1979". We're adding a lacquer cutting room in the coming months and are looking for an experienced cutter to head up the lacquer cutting duties. I have been talking with a few people; but wanted to explore all potential options before making a final decision.
If you are, or know someone who may be interested in such a position please email me at chris (at) welcometo1979 (dot) com
You can learn more about the studio at http://www.welcometo1979.com and/or http://www.facebook.com/welcometo1979
Thanks in advance,
Chris Mara
- EmAtChapterV
- Posts: 244
- Joined: Sun Jan 06, 2013 6:49 pm
- Location: Vancouver, BC
Re: Cutter Wanted- Nashville
What sort of lathe, cutterhead and electronics will you be running?
Re: Cutting Engineer Wanted- Nashville
it's a Neumann VMS70 with SX74 cutterhead
and SAL74 amp/electronics rack (with Acceleration Limiter BSB74)
-chris
and SAL74 amp/electronics rack (with Acceleration Limiter BSB74)
-chris
Re: Cutting Engineer Wanted- Nashville
Hi Chris,
Did this lathe come from Atlanta?
Just curious.
Thanks,
JJG
Did this lathe come from Atlanta?
Just curious.
Thanks,
JJG
- EmAtChapterV
- Posts: 244
- Joined: Sun Jan 06, 2013 6:49 pm
- Location: Vancouver, BC
Re: Cutting Engineer Wanted- Nashville
This would so be my dream gig if I wasn't on the other side of the continent in a completely different country, and had any stereo cutting experience, or for that matter experience on equipment newer than 1950.
- Greg Reierson
- Posts: 198
- Joined: Thu Jul 29, 2010 1:31 pm
- Location: Minneapolis, MN
- Contact:
Re: Cutting Engineer Wanted- Nashville
jjgolden wrote:Hi Chris,
Did this lathe come from Atlanta?
Just curious.
Thanks,
JJG
Hehe.... I got that one Needed a lot of work but it's 100% now.
Re: Cutting Engineer Wanted- Nashville
Glad to hear it's found a happy home
JJG
JJG
Re: Cutting Engineer Wanted- Nashville
Hmmm. Now I know why you guys wanted a tour of my cutting room so badly. Looking for knowledge on setting up your own. You could have mentioned that instead of being sneaky about it...
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Cutting Engineer Wanted- Nashville
Hey Deep Grooves, sorry you thought my intention was to be sneaky. As I explained in my initial email to you, the tour was part of our Chicago Tape Camp where we bring 6 or so local recording engineers to tour a unique facility.
http://www.welcometo1979.com/Tape_Camps.html
The goal is to heighten awareness of the business we tour, not for me to sneakily mine knowledge. As luck would have it, we found a wonderful facility to tour and you simply missed out on a chance to showcase your business to others in the industry.
Now, can we get back to the subject at hand? Is anyone looking for a job?
http://www.welcometo1979.com/Tape_Camps.html
The goal is to heighten awareness of the business we tour, not for me to sneakily mine knowledge. As luck would have it, we found a wonderful facility to tour and you simply missed out on a chance to showcase your business to others in the industry.
Now, can we get back to the subject at hand? Is anyone looking for a job?
Re: Cutting Engineer Wanted- Nashville
Lol. My cuts speak for themselves. No tour required.
If you're interested, you coukd certainly hire me to train someone to run your lathe.
If you're interested, you coukd certainly hire me to train someone to run your lathe.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
- dietrich10
- Posts: 842
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact:
Re: Cutting Engineer Wanted- Nashville
Chance of lifetime for sure to work for Chris in Nashville.
http://vintageking.com/mara-machines.html
http://vintageking.com/mara-machines.html
cutting lacquers-vms70 system
Re: Cutting Engineer Wanted- Nashville
Position Filled.
Thanks!
Chris Mara
Thanks!
Chris Mara
- concretecowboy71
- Posts: 569
- Joined: Mon Mar 08, 2010 10:13 am
- Location: Cleveland, Ohio, USA
- Contact:
Re: Cutting Engineer Wanted- Nashville
Darn!
Last night the news was predicting a tornado was going to roll right over me. Thought I was going to have to move to the music city!
The tornado died out over the lake and we just got rain....gonna have to stay in C-town.
Last night the news was predicting a tornado was going to roll right over me. Thought I was going to have to move to the music city!
The tornado died out over the lake and we just got rain....gonna have to stay in C-town.
Cutting Masters in Bristol,Virginia, USA
Well Made Music / Gotta Groove Records
Well Made Music / Gotta Groove Records
Re: Cutting Engineer Wanted- Nashville
so you're saying it'd take an act of god to get you to TN? lol
glad you're safe!
-chris
glad you're safe!
-chris
- concretecowboy71
- Posts: 569
- Joined: Mon Mar 08, 2010 10:13 am
- Location: Cleveland, Ohio, USA
- Contact:
Re: Cutting Engineer Wanted- Nashville
Perhaps and act of Merle Haggard!
I love the Music City, but my deal is so sweet here in C-Town, I can't leave!
I love the Music City, but my deal is so sweet here in C-Town, I can't leave!
Cutting Masters in Bristol,Virginia, USA
Well Made Music / Gotta Groove Records
Well Made Music / Gotta Groove Records