I own 2 units and one of them is significantly louder than the other and although it spins ok, it appears to be running a little rough even modulating the groove as it cuts with the vibration / noise its generating as it spins.
I've lubed all other points of the lathe (except the motor) and the noise is definitely coming from this motor.
The motor is labeled CANON MOTOR BA52-H106
Canon Seiki Co. LTD
I could not find any info online.
I assume BA52-H106 is the model number, both Atom & Vanrock lathes have this same motor.
I want to know if this motor can be lubricated or serviced in the hopes of making it quieter and run smoothly again.
Is there a location or suitable opening to drop some lubricant and what kind would be recommended if so.
Any ideas on a suitable replacement?
No info on specs so all I have are pics, maybe somebody is familiar with this motor and has an idea?
Wiring looks like beast of a job but I am up to it if I can find something that will work as drop in replacement (my guess is it won't be that easy).
![Image](https://i.postimg.cc/G2MLswdY/IMG-2844.jpg)
![Image](https://i.postimg.cc/4ymJ6Lx0/IMG-2845.jpg)
Thank you Trolls