Dj'ing with dubs cut by Deep Grooves

If you are a performer, list shows or tours here. If you know of concerts, meetings or conventions that might appeal to other members, list 'em here. Don't be shy, we are interested!

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:

Dj'ing with dubs cut by Deep Grooves

Post: # 17377Unread post opcode66
Mon Dec 12, 2011 1:26 pm

A pic of me playing out this last weekend. About to cue up a dub I cut. You can see the yellow Audiodisc Recording Blank sticker center label on it. Love playing dubs I mastered and cut myself!

Image
Last edited by opcode66 on Tue Dec 13, 2011 3:41 pm, edited 1 time in total.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio

User avatar
petermontg
Posts: 611
Joined: Sat Jun 26, 2010 7:51 am
Location: Ireland.

Post: # 17389Unread post petermontg
Tue Dec 13, 2011 3:08 pm

good to finally put a face to the name.
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com

Stereo cutter head wanted. Send email or smoke signals.

User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:

Post: # 17390Unread post opcode66
Tue Dec 13, 2011 3:30 pm

I've got mixes, video and picture galleries on my dj site as well.

http://www.djtoddmariana.com

And a bunch of examples of my video mixing are here

http://www.vjpixel8.com
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio

User avatar
piaptk
Posts: 1750
Joined: Fri Jan 25, 2008 3:40 am
Location: Tucson, AZ
Contact:

Post: # 17394Unread post piaptk
Tue Dec 13, 2011 9:09 pm

petermontg wrote:good to finally put a face to the name.
Yeah, we should start a Photos thread in the Cutters and their Work section... see what all these misfits look like!

User avatar
petermontg
Posts: 611
Joined: Sat Jun 26, 2010 7:51 am
Location: Ireland.

Post: # 17401Unread post petermontg
Wed Dec 14, 2011 6:49 am

piaptk wrote:
petermontg wrote:good to finally put a face to the name.
Yeah, we should start a Photos thread in the Cutters and their Work section... see what all these misfits look like!


https://lathetrolls.com/viewtopic.php?t=2961&mforum=lathetrolls
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com

Stereo cutter head wanted. Send email or smoke signals.

Post Reply