Hello, I'm selling my Zenec SAL84 system starting at $1.
Collection in Europe.
Weighs 45kg
Square stereo
Six channels of 500W, 5-ohm RIAA, etc.
Electronic differential bridge head protection system
Vertical tracking control system
Please submit offers.
I will provide photos of the interior if the offer exceeds $500, plus $500 to secure this US side of the TSSOLT website. This is not an auction; please bid publicly; I do not respond to emails.
Please do not confuse this with the previous German version of the SAL84, which I traded for a military-grade iPhone or cell phone. :DI didn't write the deadline for the offer, until 05/10/2025, 12:00 CET, then I won't be around for a long time because I'm going on a peace mission...
Zenec SAL84G mastering system for sale 1$ START
You do not have the required permissions to view the files attached to this post.
Re: Zenec SAL84G mastering system for sale 1$ START
Yes, Zenec SAL84 G made for me on my order, if there are no takers, I will have to send it to recycling for aluminum smelting, because I sell everything for a dollar, I also have a house for sale, right on the border with Ukraine, 8 kilometers away, and there is a fierce war there, I hear explosions from time to time in my house... 
Re: Zenec SAL84G mastering system for sale 1$ START
I remembered that I still have a spare 2x500W power amplifier, I'm adding it for free because I won't need it, sal84Zenec has three such amplifiers and the one in the picture is the fourth one,
and this is the power supply for one channel of the head, two such electronic units make up two channels, and one such 2x500W amplifier is the power supply for the preview monitor, there are six channels in total and a lot of different modules for various cutting operations, who knows what's going on...I will only add that one such module costs $500 at retail price, new, that's how much I paid, it's a US CROWN power amplifier
and this is the power supply for one channel of the head, two such electronic units make up two channels, and one such 2x500W amplifier is the power supply for the preview monitor, there are six channels in total and a lot of different modules for various cutting operations, who knows what's going on...I will only add that one such module costs $500 at retail price, new, that's how much I paid, it's a US CROWN power amplifier
You do not have the required permissions to view the files attached to this post.
Re: Zenec SAL84G mastering system for sale 1$ START
The offer is no longer valid. I need to get myself together and soon I'll be leaving this vale of tears. I'm putting the SAL84Zenec system in the basement or in a bunker because[ putin has gone completely crazy... Rockets flew over my house and returned to Ukraine...]
I also have a recording head for sale. There are photos on the professional lathe website. The brass one is modified and records quite well. It will cost $100 plus $100 for the owner of TSSOLT, and $50 shipping only to Europe, as they don't ship outside of Europe.
I also have a recording head for sale. There are photos on the professional lathe website. The brass one is modified and records quite well. It will cost $100 plus $100 for the owner of TSSOLT, and $50 shipping only to Europe, as they don't ship outside of Europe.
Re: Zenec SAL84G mastering system for sale 1$ START
Head Zdenec for sale 100$+100+50$=250$
You do not have the required permissions to view the files attached to this post.
-
Podorvanov
- Posts: 79
- Joined: Mon May 04, 2015 8:14 pm
Re: Zenec SAL84G mastering system for sale 1$ START
Hello,Podorvanov wrote: ↑Sun Oct 05, 2025 12:37 pmHello. Could you please list this head on eBay so I could buy it from you? Of course, it would be more expensive to cover the eBay fees. Do you have any more photos of this head?
[My war mission is over, luckily I emerged unscathed...]
I still have a few things to take care of, but if I get my act together, I'll set up an eBay account and have a warhead for sale. I'll tell you this,
I don't have a recording machine now, I have to build one from scratch. I used to record with this head on copper and brass sheets [DMM], and it didn't impress me... with mediocre recording quality.
However, with any available plastic or plastic discs, I didn't achieve good results with this head, or rather, very poor quality, bad, and more noise than recording. I decided long ago that plastic can only be embossed with a stylus, but it's not suitable for cutting grooves, regardless of the recommendations of various suppliers.
For this head, you need an original Lauqcer master disc with a backing, aluminum sheet, such as Transco or Apollo, but these days it's almost impossible to buy these discs or discs commercially.
-
Podorvanov
- Posts: 79
- Joined: Mon May 04, 2015 8:14 pm
Re: Zenec SAL84G mastering system for sale 1$ START
Hi. Okay, thank you. And thank you for your reply.zdenek wrote: ↑Mon Nov 10, 2025 12:19 amHello,Podorvanov wrote: ↑Sun Oct 05, 2025 12:37 pmHello. Could you please list this head on eBay so I could buy it from you? Of course, it would be more expensive to cover the eBay fees. Do you have any more photos of this head?
[My war mission is over, luckily I emerged unscathed...]
I still have a few things to take care of, but if I get my act together, I'll set up an eBay account and have a warhead for sale. I'll tell you this,
I don't have a recording machine now, I have to build one from scratch. I used to record with this head on copper and brass sheets [DMM], and it didn't impress me... with mediocre recording quality.
However, with any available plastic or plastic discs, I didn't achieve good results with this head, or rather, very poor quality, bad, and more noise than recording. I decided long ago that plastic can only be embossed with a stylus, but it's not suitable for cutting grooves, regardless of the recommendations of various suppliers.
For this head, you need an original Lauqcer master disc with a backing, aluminum sheet, such as Transco or Apollo, but these days it's almost impossible to buy these discs or discs commercially.
