SC99 NINGA head transducters clone for sale.

[zdenek]

Hello!
For sale is an electrodynamic transducer head, a clone of the SC99.
The aluminum drive coils have a diameter of 9mm [the same as the original SC99], wound with flat wire with a DC resistance of 4.7Ω. The coils have a double suspension [very similar to Neumann SX74 springs]. Dynamic feedback has a resistance of 125Ω.
The transducer body has a diameter of 30mm at its thickest point.
Weight: 50g.
I have unlimited quantities of these transducers; we can produce an infinite number.
You can buy 1 for $200 or 2 for $300. From a technical perspective, this clone is identical to the original SC99. The transducer head easily covers a frequency range from 2 Hz to 27,000 Hz.
The peak power output of the head is approximately 600 Watts per second.
Average power is 10 Watts [approximately 9 J].
Interested parties are welcome to contact us for further details, for example.
We currently have 100 units in stock.For every transducer sold, 50% of the money goes towards maintaining TSSOLT.

[Thelurker]

More lies! Why do you need to try and seek such attention and validation!

[zdenek]

More lies! Why do you need to try and seek such attention and validation!

I don't know you man and I have nothing for you.

[zdenek]

If anyone is interested in purchasing parts for this head, here are the parts:
1. Magnetic system, armature, lower opening pole piece
Price: $50
2. Special N50 neodymium magnet
Price: $30
3. Threaded pole piece 3xM2.5mm, upper closing armature
Price: $50
4. Drive coil housing with spacers
Price: $30
5. Drive coil housing with an inner diameter of 9mm, with pre-wound enameled flat wire measuring 0.14x0.075mm with connection leads and a resistance close to 4.75Ω
Price: $100
6. Stamped springs, die-stamped in a star shape with parallel arms and a phosphor alloy spring embossment
Price: $100 for two springs
7 Closed magnetic feedback coil system
Price: $50
8 double-wound feedback coils with an outer diameter of 4.5mm and a DC resistance of 125Ω
Price: $120 each.
For each item, a 50% donation to the TSSOLT website is required.
Best regards.

[zdenek]

Here's a recording of a so-called DMM plate made of rolled and mirror-polished copper sheet.
The transducers used were NINGA with an additional external 40 kHz modulator. The cutting knife was diamond.
The system used was the SAL74B [a faithful copy].This is an authentic, real recording with NINGA DYNAMIC transducers.
https://www.youtube.com/watch?v=FD7U9MEat2U

[emidisc]

Please send one your incredible transducers to my studio for immediate fast track testing and inspection
Alternatively you could save on postage and deposit your amazing product into your nearest waste skip for delivery to landfill
The shit photo is a BIG RED FLAG!

[Thelurker]

Please send one your incredible transducers to my studio for immediate fast track testing and inspection
Alternatively you could save on postage and deposit your amazing product into your nearest waste skip for delivery to landfill
The shit photo is a BIG RED FLAG!

Yes this guy has validation issues, offers parts and story’s that do not exist.

What is that strange video all about and what does that prove?

[zdenek]

Free shipping.
The principle is simple.
You deposit the required amount into the TSSOLT account With a note from ZDENEC for the order. .
You provide me with your shipping address.
I pack the head components you ordered and ship them to you.
This doesn't mean you're depositing anything into my account. You're only depositing the required amount into the TSSOLT account.
Let me explain this more clearly.
I don't need any money from you.
These are free grants from me.