I'm here to show you new purpose built plinths for holding a Technics SP10 MKII and SP15.
Each plinth is custom made, can be adjusted to spin the turntable 90 degrees when needed, as for anyone who uses these professional turntables on a Vinyl Recorder T560, you can often find that the standard mass produced plinths are a little large making the outer edge of a 12” pretty damn close to the vacuum tube.
The hole for the turntable is customisable. This means that the plinths are perfect for a Vinyl Recorder T560, or to have as a home player plinth, with a suitable hole for the tonearm. I'm also able to engrave custom logos on them upon request.
The price for one of these plinths is €100 excluding shipping. If anyone is interested in these of has any questions, feel free to get in touch!
Pictured below is a prototype designed and tested for Pressure Mastering.
New Custom Plinths for SP10 MKII and SP15
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- woodenturnip
- Posts: 13
- Joined: Sun Feb 05, 2023 6:34 am
New Custom Plinths for SP10 MKII and SP15
You do not have the required permissions to view the files attached to this post.
Re: New Custom Plinths for SP10 MKII and SP15
Very happy with mine!
- woodenturnip
- Posts: 13
- Joined: Sun Feb 05, 2023 6:34 am
Re: New Custom Plinths for SP10 MKII and SP15
Unfortunately I am no longer making these plinths