There is absolutely no pretention in this and I assume this may look childish for the gurus here who build neumann-like lathe heads while watching tv but whatever...
I ordered a spool of copper wire on ebay. Once received I build a quick & dirty coil winder... I will add a turn counter later.
Unfortunately, the only neodynium magnet I had was too big to fit in the capsule... I'll buy smaller ones .
Anyway, all advices are welcome...
![Image](https://dl.dropboxusercontent.com/u/93952926/IMG_20130623_005739.jpg)
![Image](https://dl.dropboxusercontent.com/u/93952926/IMG_20130623_005754.jpg)
![Image](https://dl.dropboxusercontent.com/u/93952926/IMG_20130623_010038.jpg)