Neumann High End Limiter.

Topics regarding professional record cutting.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

User avatar
mossboss
Posts: 2063
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

Post: # 13709Unread post mossboss
Fri Mar 25, 2011 3:02 pm

You are certainly welcome No Problem at all Cheers
Chris

User avatar
gold
Posts: 365
Joined: Tue Apr 28, 2009 12:03 am
Location: Brooklyn

Post: # 13732Unread post gold
Sat Mar 26, 2011 1:37 pm

I think the confusion about the control signal source for the Neumann high frequency limiters stems from there being two models.

The HK66 which came with the VG66 rack does indeed take it's control signal from the SI66 Circuit Breaker. This is post RIAA and would need an external RIAA encode circuit if you wanted to use these outside of the rack.

The BSB74 Acceleration Limiter that came with the SAL/VG 74 racks is a typical inline processor and derives it's control signal from the audio input.

User avatar
mossboss
Posts: 2063
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

Post: # 13747Unread post mossboss
Sun Mar 27, 2011 8:34 am

Thanks for that Paul
Cheers
Chris

Post Reply