Greetings to everyonee
I would be grateful if anyone here has and is ready to share manual and/or schematics for Grampian RA3/RA5 mono cutting amps. All I could find for now is an old presentation sheet.
Also, is there anybody in today's world who could be able to reconnect feedback wires ina grampian Type D head? Tried myself. Really hard thing to do without dedicated equipment/
Any help highly appreciated, will give back if able.
Blessings
pidim
Grampian RA3/RA5 doc / cutterhead repair
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Grampian RA3/RA5 doc / cutterhead repair
You do not have the required permissions to view the files attached to this post.
Re: Grampian RA3/RA5 doc / cutterhead repair
Hi,
Here is a link to post I made several years ago that may be helpful:
https://www.lathetrolls.com/viewtopic.php?f=1&t=5457&p=33240
Mark
Here is a link to post I made several years ago that may be helpful:
https://www.lathetrolls.com/viewtopic.php?f=1&t=5457&p=33240
Mark
Re: Grampian RA3/RA5 doc / cutterhead repair
Thanks a lot, great work but I've found these and am going into their restoration so I would need help from original documentation.
pidim
pidim
Re: Grampian RA3/RA5 doc / cutterhead repair
found the RA3 missing RA5 !