Hara 180 type recorder help
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Hara 180 type recorder help
hi,
I have the hara m180 version disc recorder. On mine, the cutter head when lifted up to go to the platter/ record is not high enough to clear the edge of the record/ platter. If I remove the stylus (what type cutting stylus, long or short, mine is long) and rubber mat, it just clears. My manual is in Japanese (is there an English version somewhere?); Is there a height adjustment for the head or arm?. I looked around and couldn't find one. I thought I had maybe bent the arm as I had the mechanism out of the cabinet upside down on a thick blanket to work on loose items inside. That arm mech. is very sturdy, and looks straight. Now, when it was shipped (not from you) from Japan, I noticed the cutter head was jammed in the down position and I had to free it, so that may have done it (that middle spring metal was on the wrong side of the plunger that raises the head up and down, Any help would be great (all other functions seem to work properly). Thank you, Rick
I have the hara m180 version disc recorder. On mine, the cutter head when lifted up to go to the platter/ record is not high enough to clear the edge of the record/ platter. If I remove the stylus (what type cutting stylus, long or short, mine is long) and rubber mat, it just clears. My manual is in Japanese (is there an English version somewhere?); Is there a height adjustment for the head or arm?. I looked around and couldn't find one. I thought I had maybe bent the arm as I had the mechanism out of the cabinet upside down on a thick blanket to work on loose items inside. That arm mech. is very sturdy, and looks straight. Now, when it was shipped (not from you) from Japan, I noticed the cutter head was jammed in the down position and I had to free it, so that may have done it (that middle spring metal was on the wrong side of the plunger that raises the head up and down, Any help would be great (all other functions seem to work properly). Thank you, Rick
Re: Hara 180 type recorder help
You can scan and have a translation using google translator,flashbk13 wrote: My manual is in Japanese (is there an English version somewhere?);
if you have a android phone you can download the translator app and have a real time translation.
Epos Laboratory Phono Cartridge Retip & Lathe Cuts
http:\\www.eposlab.gr
info@eposlab.gr
IG EposLab (https://www.instagram.com/eposlab/?hl=en)
http:\\www.eposlab.gr
info@eposlab.gr
IG EposLab (https://www.instagram.com/eposlab/?hl=en)
Re: Hara 180 type recorder help
Thank you EposLab for the reply, i'll try that. Rick
- mysticfarm
- Posts: 1
- Joined: Sun Apr 04, 2021 7:14 pm
- Spiderxdeath
- Posts: 62
- Joined: Wed Aug 31, 2016 3:13 pm
Re: Hara 180 type recorder help
I have a translation of the manual send me an email if you need it
- Spiderxdeath
- Posts: 62
- Joined: Wed Aug 31, 2016 3:13 pm
Re: Hara 180 type recorder help
I’ve been using this machine for years and have had some great results after a bit of trial and error... has anyone successfully upgraded the cutterhead or made any other mods ?
- Spiderxdeath
- Posts: 62
- Joined: Wed Aug 31, 2016 3:13 pm
Re: Hara 180 type recorder help
Actually I’m talk about the Hara VA 12” model