The Secret Society of Lathe Trolls

MY45 is looking for 10" laquers, they are out of stock
since months (long before the Apollo desaster), and we have
special 10" galvano...
thanks! andi/my45

there are thousends of jobs behind the laquer manufacturing process!

we sell a good working filter & pump. was used for a 300 Liter bath,
cleaned & tested. comes with spare filter papers. pm for pics and price.
thanks! andreas/my45

MY45 is looking for a DMM head, any condition, we have some stuff for trade,
SX74 (not for sale alone), ZUMA Pitch Computer

MY45 has a ZUMA Pitch Computer for sale, coming with all documents, works,
but we can´t fully test it, because we don´t have a lathe that fits for the zuma.

I am not 100% sure, but I think, the 6042 is also in the SP-02?
Here is a replacement:
http://fidelisanalog.com/product/mn6042/
good luck!

Hello! Nice work! I am really amazed, that a Caruso cut (or was it done with another head as shown in the video), with the resonances in the audiorange, can get such an award. Don´t misunderstand me, I fully respect flo´s and your work, but the caruso was mainly designed with the low cost in mind, o...

you will normally always need a hydraulic oil cooler, because the oil is
always under full pressure, when the cooling cycle is active...
there are systems with water or air available...
good luck!

Hello trolls! MY45 is cleaning up the stock, so we can sell some things: -galvanic project, this are parts, disassembled from a galvanic bath, the main things are: 2x cells with titanium baskets, motor, turntable to mount the laquers etc., mechanically complete. you will need: 200liter tank for the ...

a direct drive motor from a washing maschine like this: https://german.alibaba.com/product-detail/dd-motor-direct-drive-motor-for-sanyo-60287307043.html?spm=a2700.8699010.normalList.106.7ef14750KygIcl is availabe from service companys arround 100 Euros, just check, which washing maschine has a direc...

connecting the transformer should be easy:
connect the red and the orange, this is your ground,
then, black is positive 15V (VA), yellow is negative 15V (VB).
I spoke before of regulated DC voltage, the transformer delivers unregulated AC!

Hello! I hope, I am not wrong, but the power connector is a 3pin? You will need +15V, ground and -15V. On the actual board are two 2-pin connectors, one is for RIAA on/off bridge, the other is for an additional mute ciruit. Maybe on older PCB´s the connectors are different, I don´t know... Happy sol...

what is a flywheel for a record lathe?

it looks very much like the "joana" head from poland....

Hello there!
MY45 is looking for a set of magnets for SX-68/74 or compatible.
Or any hint, where I can find something.
Thank you very much!
Andreas from www.my45.de

Hello Marc!
I think, you are late, very late!?
Lot of products still available....
Just my point of view...
All the best for you!
Andi from my45

good luck!

Hello Ragnar!
IMHO the best way is, to contact your local hydraulic supplier for help & service,
they are mostly very experienced and will supply you with all needed parts etc.
This will cost some euros, but at the end of the day, you have something good.

good luck!
Andreas

have Neumann headmount to trade

me and my mother are also searching for one, drawing for a new one is
99% finished. if anybody is interested, I can make more. size is 14".