Search found 23 matches
- Sun Apr 17, 2022 2:50 pm
- Forum: Classifieds & tip-offs
- Topic: Tungsten Triangle Embossing Stylus for Presto 1-D
- Replies: 10
- Views: 3074
Re: Tungsten Triangle Embossing Stylus for Presto 1-D
Few months ago i bought a stylus from Tasos . I used it on a 3d printed cutterhead designed by me inspired from Sourri's head . The sound is way better than the one i obtained with simple tungsten needles . I obtained on polycarbonate around 5-6 grooves / mm , 45 rpm , at a backward tilted angle of ...
- Mon May 10, 2021 8:56 am
- Forum: Newbie Forum
- Topic: From scratch
- Replies: 53
- Views: 23535
Re: From scratch
Hi Gabor . I recently bought something like this and , after i tested , i can say it does a perfect job :) https://www.officedirect.ro/accesorii-pentru-birou/cuttere/cutter-compas-cu-6-lame-de-rezerva-si-2-mine-ecobra-770630?gclid=Cj0KCQjws-OEBhCkARIsAPhOkIbPY1NDJKH0iChuC9Szy7_MU1d6TYeEl9ZC9jMewZ5Ma...
- Fri Apr 09, 2021 6:10 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Thanks Fela Borbone
- Fri Apr 09, 2021 4:41 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
- Thu Apr 08, 2021 3:41 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi soeffingodly , sorry for the late reply . Now i work at another version of the lathe , stil embossing . Can you tell me what is the diameter of the needle in the mounting area ? Now i use a 1.6 mm needle but i can modify the needle holder .
- Mon Mar 29, 2021 1:23 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi reservox , the rod , i used a carbon fiber one , is glued only on the tip of the cone , it goes about 5-6 mm inside the cone , it does't touch the membrane of the tweeter .
- Sat Mar 27, 2021 5:11 am
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Some more tests , still problems above 10khz , probably the 3d printed parts are not rigid enough .
- Wed Mar 24, 2021 3:13 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Was it heating first or lighter fluid ? ))))))) thanks again
- Wed Mar 24, 2021 2:57 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Thanks soeffingoodly for the tip
- Wed Mar 24, 2021 3:54 am
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
For 7'' i use 1 mm and for 10'' i use 1.5 mm .
- Tue Mar 23, 2021 8:05 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi , i have to dissapoint you but i'm a newbie too :) . I can only help you with informations about my project , on this forum are other users with infinite more knowledge than me . I use car tweeters Peiying PY T 59 , i emboss with a tungsten needle , first i used a cone shaped at 90' with 180 gram...
- Sun Mar 21, 2021 4:21 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi , I attached here a compressed file with the stl.s and some photos of the embossing head , based on the one made by Souris . For connecting the cones with the needle support i used 1mm carbon fiber rods , also 1mm carbon fiber rods from the needle suport to the cilinders and for connecting the he...
- Wed Mar 17, 2021 8:14 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi ilovedrums247 , yes the screw is M3 and the cutterhead can lose some weight . Mrd i still work on this project but when it will be ready probably i will upload the stl s on this site , if the moderators are ok with this . I continued to work on my recorder , embossing way and i made some improvem...
- Tue Feb 16, 2021 2:21 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
This is a movie a made last month . https://youtu.be/y_u7oGvssoA
- Tue Feb 16, 2021 2:19 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
The head is a copy of the one made by Souri , 3d printed and with car tweeters . Yes , i reversed the phase of one speaker . Also , if you find anything interesting in my project , ask . I can send you the .stl s .
- Tue Feb 16, 2021 1:57 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi XRC , thanks for the tips . I noticed your work , with better results than mine and if it's ok with you , i'll ask some more advices . Thanks alot once again !
- Sun Feb 14, 2021 3:54 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi Jesus , this way i obtained some results . I tryied to lighten up the weight at about 140 grams and to the end of the record , when playing , the needle didn't stayed in the groove . The tracking force of the turntables used for listening the recordings is around 3-3.5 grams , as i usualy use whe...
- Fri Feb 12, 2021 4:55 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi Gabriel , sorry for the late reply . Check your FB messages
- Fri Jan 01, 2021 3:41 pm
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi Gabriel , Happy new year ! Sorry for the late reply . Yes , i make small increments adjustments untill i get better results and than i write the values in a notebook and make photos of the set up . Very primitive way but apparently it works :))) . You know what they say : if it's stupid but it wo...
- Tue Dec 29, 2020 8:10 am
- Forum: Newbie Forum
- Topic: DIY lathe , new to this , what am i doing wrong ? :)
- Replies: 47
- Views: 12318
Re: DIY lathe , new to this , what am i doing wrong ? :)
Hi Gabriel , thanks for the response :) . Yes , i was considering the infrared lamp , actually now i design the stand for it . I saw that the recomended surface temperature is about 35'-45' C . Today or tomorrow i'll make some tests . Another thing that's still blurred for me is the embossing weight...