The Secret Society of Lathe Trolls

Me to $100

Something else which surprised me is that the Hara M-180 has more powerful internal amplifier than the later Vanrock lathes.
Specifically the Hara M-180 use an SI-1010G (10W , THd=0.5% at Full Power) while the Vanrock use an STK011 (6.5W , THd=2% at Full Power).

An easy way to improve abit the output is just to adjust the variable resistors of the following picture*:... Hallo Epos, tolle informationen - Danke. Schön, dass du wieder über das tolle Gerät berichtest. Mir gefällt ganz besonders das IR-Bild von der Nadelheizung. Womit hast du das aufgenommen? I...

An easy way to improve abit the output is just to adjust the variable resistors of the following picture*: . . photostudio_1739182652927.png . . As show on picture , from left to right are: Compressor , <1kHz , 2kHz , 8kHz. Compressor : turn clockwise to eliminate compression , turn counter-clockwis...

Any picture?

Hi all and Happy New Year! 1st of the year and i accidentally erase an embossed recording of my own. I was trying to fix a center label sticker using a small torch lighter and there it happened. All grooves just disappeared :-( Today i made some extended research , giving more tries on old (discarde...

100° is the groove geometry. Recording angle is set 90°-85° as shown on the instructions manual below. I mainly use myshank blanks and prepare only by using zippo lighter fluid. No heat or any lub at all. I tried lots of different angles of triangle tip focusing for the best results according to sou...

SOLD

Lot of offers (good&bad) but none triggered back then. Looked for stylus screw but was not lucky :-( so i was able only for audio test on air. Would like to sell it for 1500€ including a NOS short shank Sapphire cutting stylus. Shipping cost upon request. Paypal payment F/F prefered. IMG_20231006_15...

lilili wrote: ↑

Sat Mar 11, 2023 12:03 pm

May I ask how you detect these data? Thank you!

I did measurements on my own Hara lathe!
There's a work in progress and soon will update with some upgrade mods

Thinking of selling my latest addition on my system , the Grampian BBC B1/A.G.U. I am recording using my Presto 1D (modified by Jesus I. Agnew ) which i am very familiar with but soon i will receive my Stereo cutting head by Agnew Analog . Main coil works (8ohm) , feedback coil is dead (reads infini...

SOLD!

Hi again! For sale an 500ohm cutting head ! I dont really know the brand or model. All i know is that it was attached on a Royce Senior lathe (i sold recently). Die Cast housing , Seems to be in original working condition , DC Resistance reads 262ohm . No further tests made as i have no amp with mat...

Sold!
Thanks anyone for the interest!

Just want to sell a Royce record lathe. Comes with three (3) feedscrews and its original manual. Can fit on any turntable and cut discs from 6" to 17" ! I was quick mounting it on my Rek-O-Kut Master Pro lathe just to ensure it works. (Check video please) Sure needs some cleaning and lube to ensure ...

To me it looks like something like VR is needed. ..also don't expect Souri Craftsmanship & SQ. When I found this forum like 6 years ago, some people back then were saying they gonna make a better machine and now in 2023 nobody has finished anything and on the other side you have Souri's machine who...

trailerparkjesus wrote: ↑

Mon Feb 27, 2023 11:48 am

but still.. don't expect Souri prices.

..also don't expect Souri Craftsmanship & SQ . Jesus' products are simply superior.

Hope soon to get his stereophonic cutterhead..

Hi trolls!
Recently got an Grampian head and i am looking for all kind of info!
Main coil reads 4ohm , infinity on Feedback coil so probably needs to be recoiled.
Any kind of info will be apreciated

Thanks
Tasos
Epos Lab

Ειναι σε λειτουργική κατασταση?
Is it in working condition?