Schematics for a M/S cod/dec console
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Schematics for a M/S cod/dec console
Hi trolls!
I missing schematics for made a console, any help?
Cheers
I missing schematics for made a console, any help?
Cheers
Hi,
If I understand corerectly, you want to know how to encode, process and decode MS.
To encode:
Mid = L+R (This is just the mono sum)
Side = L-R (The out of phase information)
You can process either signal as desired.
To reform the stereo:
L = Processed Mid + Processed Side (L+R) + (L-R) = 2L
R = Processed Mid - Processed Side (L+R) - (L-R) = 2R
Hope this helps.
Mark
If I understand corerectly, you want to know how to encode, process and decode MS.
To encode:
Mid = L+R (This is just the mono sum)
Side = L-R (The out of phase information)
You can process either signal as desired.
To reform the stereo:
L = Processed Mid + Processed Side (L+R) + (L-R) = 2L
R = Processed Mid - Processed Side (L+R) - (L-R) = 2R
Hope this helps.
Mark
http://www.megaupload.com/?d=DTZ06NFW
this is a link to dowload the schematics of the sp72
look at the EE66 card , you have a example of a mid/ side encoder decoder with a high pass filter in the side before the recoding in L/R
or this page
http://www.proaudiodesignforum.com/forum/php/viewtopic.php?f=7&t=262&sid=601688d2aa24a7f23c6777e7e9288377
I built it and it works
Yann
this is a link to dowload the schematics of the sp72
look at the EE66 card , you have a example of a mid/ side encoder decoder with a high pass filter in the side before the recoding in L/R
or this page
http://www.proaudiodesignforum.com/forum/php/viewtopic.php?f=7&t=262&sid=601688d2aa24a7f23c6777e7e9288377
I built it and it works
Yann
Ouh Yeah!! http://www.ka-electronics.com/KAelectronics/MS_Matrix/MS_Matrix.htm
Muchas gracias por la ayuda Yann!
Muchas gracias por la ayuda Yann!
the same thing , but passive , done with transformers
Last edited by Nickou on Mon Jun 07, 2010 4:03 pm, edited 1 time in total.