Hi Folks - long time lurker, first time poster.
Anyone out there looking to step-up to all-analog cutting or maybe in need of a spare?
I'm primarily a digital mastering engineer here in Los Angeles but, I also rebuild/restore Studer tape machines. To that end.........
I'm currently re-working on a pair of Studer A80VU preview machines that the owner would like to sell once they're all tuned up.
The 1st deck is a 1/4" Mk1 with Butterfly heads in both positions and the 1.080.773-11 transformerless IO cards
The 2nd deck is a 1/2" Mk2 with standard electronics
Both decks are 15/30 and both decks have NEW Audio, Logic and Power Supply electrolytic caps and NEW guide and roller bearings. Both decks will also have full tension adjustments and be operationally turn-key prior to delivery.
Please do let me know if anyone is hunting and I'll connect you with the owner directly.
Thanks--Steph
Tip-Off: Studer A80VU Preview machines
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- StephenMarsh
- Posts: 19
- Joined: Wed Apr 26, 2017 10:13 am
- Location: Hollywood Hills
- Contact:
Re: Tip-Off: Studer A80VU Preview machines
Hi Stephen,
Any leads on any lathes for sale in the Los Angeles area? Looking for a presto 6n or any decent Fairchild system.
Thanks,
Any leads on any lathes for sale in the Los Angeles area? Looking for a presto 6n or any decent Fairchild system.
Thanks,
- StephenMarsh
- Posts: 19
- Joined: Wed Apr 26, 2017 10:13 am
- Location: Hollywood Hills
- Contact:
Re: Tip-Off: Studer A80VU Preview machines
Nothing that I know of at this time but I'll keep me ear open. the only mothballed lathe I know of in LA is the old precision VMS80 which I don't think Marcussen ever got going again. Certainly there are others better informed than me on here though.