Neumann SA74 Suspension Box Help
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- pandapolar
- Posts: 94
- Joined: Sun Jun 23, 2013 9:00 pm
- Location: Australia
- Contact:
Neumann SA74 Suspension Box Help
Hi Trolls
We are doing up an SA74 and need some help (photos would be great) ...
In the SB the CutterHead Dropping Lever works as per normal, dropping the head down, but there is nothing to keep the lever engaged and the head (and lever) returns back to the up position.
when looking inside the SB, specifically at the Cutter Lift Button, there is nothing to link the lever and the lift button... i assume we have a part missing... ??
thanks guys
We are doing up an SA74 and need some help (photos would be great) ...
In the SB the CutterHead Dropping Lever works as per normal, dropping the head down, but there is nothing to keep the lever engaged and the head (and lever) returns back to the up position.
when looking inside the SB, specifically at the Cutter Lift Button, there is nothing to link the lever and the lift button... i assume we have a part missing... ??
thanks guys
Re: Neumann SA74 Suspension Box Help
There's a bar actuated by a solenoid that is spring loaded and engages a piece on the shaft that the drop lever is attached to. You can see it from the left side of the box (where the mounting nut is) with the side cover removed. Sometimes the mounting bracket is out of adjustment, it's held with two screws.
- pandapolar
- Posts: 94
- Joined: Sun Jun 23, 2013 9:00 pm
- Location: Australia
- Contact:
Re: Neumann SA74 Suspension Box Help
heres some pics
You do not have the required permissions to view the files attached to this post.
Re: Neumann SA74 Suspension Box Help
Wow, you're missing the solenoid with the bar completely...
- pandapolar
- Posts: 94
- Joined: Sun Jun 23, 2013 9:00 pm
- Location: Australia
- Contact:
Re: Neumann SA74 Suspension Box Help
you wouldnt happen to have a photo???tubefan wrote:Wow, you're missing the solenoid with the bar completely...