new guy here a few questions
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
got some goodies from vistaprint today
cards and a rubber stamp
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
https://www.youtube.com/watch?v=eMuOrCS-9zA&feature=em-upload_owner
latest cut and i think the best one ive done yet
this one was recorded in stereo
latest cut and i think the best one ive done yet
this one was recorded in stereo
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
i decided to bite the bullet and buy a 1200 today for my lathe
should help a bit with warble
ill keep us updated
should help a bit with warble
ill keep us updated
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
https://www.youtube.com/watch?v=UPbeavCIDPs
https://www.youtube.com/watch?v=K2WUkshiaPo&feature=youtu.be
https://www.youtube.com/watch?v=95n3TqEck50&t=10s
https://www.youtube.com/watch?v=kCL_ISzh9hw&t=3s
https://www.youtube.com/watch?v=KVXG0K0pU_4
https://www.youtube.com/watch?v=mNTPhKZkBl0&t=4s
more progress
https://www.youtube.com/watch?v=K2WUkshiaPo&feature=youtu.be
https://www.youtube.com/watch?v=95n3TqEck50&t=10s
https://www.youtube.com/watch?v=kCL_ISzh9hw&t=3s
https://www.youtube.com/watch?v=KVXG0K0pU_4
https://www.youtube.com/watch?v=mNTPhKZkBl0&t=4s
more progress
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
pic of my record i made today with new blanks i made
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
my new base for my overhead lathe
79' 1200 with a nos 2006 main motor board and platter magnet
79' 1200 with a nos 2006 main motor board and platter magnet
Instagram @styluspressurerecords
Re: new guy here a few questions
Hot damn
<\\\\\\\\\\\\\\\\\\\\\[[[[[[[\/]]]]]]]\\\\\\\\\\\\\\\\\>
Recordette Sr.......Presto K-8
Recordette Sr.......Presto K-8
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
its coming together
i have a record producer coming to film some cutting with a hi def camera this weekend
ill post once its all done in a month or so
peace
i have a record producer coming to film some cutting with a hi def camera this weekend
ill post once its all done in a month or so
peace
Instagram @styluspressurerecords
Re: new guy here a few questions
Amazing work Fred! I'm amazed how quickly you've put all this together!
Your website is looking good.
Your website is looking good.
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
thanks
im always on the grind
hehe
peace
im always on the grind
hehe
peace
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
a record i cut last weekend for a homie
turned out nice
turned out nice
Instagram @styluspressurerecords
Re: new guy here a few questions
fredbissnette wrote:i have a thread about my cutter and this one yes
something wrong here?
Not at all!
http://www.myshank.com
skype : steven.myshank
* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
skype : steven.myshank
* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
when my 1200 gets here (which should be weds) i am going to modify it as per directed by vinyliums dubcutter with the resistor mod for more torque
ill let everyone know how that works out
the 1200 im getting is a mix match of parts its a 1978 base with a 2006 motor board and platter
i aim to start cutting for clients soon, my audio is good but torque has been an issue with warble
cheers
oh and if that does not work im going to buy a stanton st 150 oem super torque deck or try to find an sp10
ill let everyone know how that works out
the 1200 im getting is a mix match of parts its a 1978 base with a 2006 motor board and platter
i aim to start cutting for clients soon, my audio is good but torque has been an issue with warble
cheers
oh and if that does not work im going to buy a stanton st 150 oem super torque deck or try to find an sp10
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
i got my 1200 and after some custom resistor mods to the motor board i can now cut warble free audio on 10'' and 7'' havent tried 12'' but im skeptical but im happy to report that a heavy cutterhead with a modded 1200 will work for basic embossing
cheers
cheers
Instagram @styluspressurerecords
Re: new guy here a few questions
Hey Fred,
I did a resistor torque mod a while back on my SL 1200, and got better results at 45RPM but a speed oscillation at 33RPM. Do you have any issues with that?
Best Regards,
Wim
I did a resistor torque mod a while back on my SL 1200, and got better results at 45RPM but a speed oscillation at 33RPM. Do you have any issues with that?
Best Regards,
Wim
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
my 78 1200 has a 680k resistor at r209 so i had to improvise to get it near 100 i got it at 88k and that seems to be stable at 33 and 45
plus my magnet on the platter is brand new and the board was recapped
cheers
plus my magnet on the platter is brand new and the board was recapped
cheers
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
https://www.mediafire.com/?aly8vabruidio1q
cut from a flac file on my 1200 lathe and ripped to my computer off my akai turntable
this is what my lathe can do now
cut from a flac file on my 1200 lathe and ripped to my computer off my akai turntable
this is what my lathe can do now
Instagram @styluspressurerecords
Re: new guy here a few questions
Hi!
I don't really like how it looks your DIY lathe but... What a SOUND!!!! I really like how it sounds your last sample file.
Keep it Up!
Do you use these cones?
http://www.ebay.com/itm/Record-lathe-cutter-presto-record-in-stylus-needle-styli-rek-o-kut-recorder-/282085271275?hash=item41ad97a6eb:g:JF0AAOSwDN1UUHTk
I don't really like how it looks your DIY lathe but... What a SOUND!!!! I really like how it sounds your last sample file.
Keep it Up!
Do you use these cones?
http://www.ebay.com/itm/Record-lathe-cutter-presto-record-in-stylus-needle-styli-rek-o-kut-recorder-/282085271275?hash=item41ad97a6eb:g:JF0AAOSwDN1UUHTk
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: new guy here a few questions
what it looks like is irrelevant
i use these http://www.ebay.com/itm/Tungsten-needle-styli-stylus-presto-in-rek-o-kut-record-lathe-cutter-recorder/282085273984?_trksid=p2047675.c100623.m-1&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20160323102634%26meid%3Dc6b3042ca5d3482da6e0775e4c1ea249%26pid%3D100623%26rk%3D2%26rkt%3D6%26sd%3D282085271275
most of what you hear is in the outboard processing
www.styluspressure.ca
cheers
i use these http://www.ebay.com/itm/Tungsten-needle-styli-stylus-presto-in-rek-o-kut-record-lathe-cutter-recorder/282085273984?_trksid=p2047675.c100623.m-1&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20160323102634%26meid%3Dc6b3042ca5d3482da6e0775e4c1ea249%26pid%3D100623%26rk%3D2%26rkt%3D6%26sd%3D282085271275
most of what you hear is in the outboard processing
www.styluspressure.ca
cheers
Instagram @styluspressurerecords