ZMM sliven CU 500 MT (1997)

yep.

Moderators: piaptk, mossboss, Aussie0zborn, tragwag, Steve E., Simon

ZMM sliven CU 500 MT (1997)

Unread postby Katiemoss » Wed Jul 27, 2016 7:37 am

Looking for a manual or schematics on a universal lathe from ZMM

Having a hard time findin any resources online

Any help would be appreciated!

ZMM sliven cu 500 mt year of manufacture 1997
Katiemoss
 
Posts: 4
Joined: Tue Jul 26, 2016 9:47 am


Re: ZMM sliven CU 500 MT (1997)

Unread postby MEGAMIKE » Wed Jul 27, 2016 8:19 am

wrong type of lathe i think,or do u have other things in mind :o

i did like the vid on "ZMM Bulgaria Holding ZMM Sliven manufacturing plant"
reminds me of when i was in my mid teens working at EMS holdings..

biglove
MEGAMIKE
 
Posts: 262
Joined: Thu Feb 21, 2008 7:56 am
Location: west coast Australia

Re: ZMM sliven CU 500 MT (1997)

Unread postby Katiemoss » Thu Aug 04, 2016 10:43 am

I got an email from zmm, got a digital copy of the service manual and the parts catalogue, not sure how to upload the files though once I figure it out I'll share it with you guys
Katiemoss
 
Posts: 4
Joined: Tue Jul 26, 2016 9:47 am

Re: ZMM sliven CU 500 MT (1997)

Unread postby Katiemoss » Fri Aug 05, 2016 3:08 pm

Here is the Service manual and 3 out of the 4 parts catalogues
Attachments
CU630 Feed box.doc
CU630 Cross slide (1).doc
CU630 Apron box.doc
CU400-CU730.pdf
Katiemoss
 
Posts: 4
Joined: Tue Jul 26, 2016 9:47 am

Re: ZMM sliven CU 500 MT (1997)

Unread postby Katiemoss » Fri Aug 05, 2016 3:15 pm

The last parts catalog

Here is the contact I am using for ordering

These also all provide schematics

info@vedi-international.com
Valentin Velkov
VEDI International Ltd.
Bulgaria
www.vedi-international.com
Attachments
CU630 gear box (1).doc
Katiemoss
 
Posts: 4
Joined: Tue Jul 26, 2016 9:47 am

Re: ZMM sliven CU 500 MT (1997)

Unread postby markrob » Fri Aug 05, 2016 4:58 pm

Hi,

You are posting in the wrong forum. The lathes found here are used to cut vinyl audio discs, and are not lathes used by machinists.

Mark
markrob
 
Posts: 1111
Joined: Wed Nov 28, 2007 2:14 am
Location: Philadelphia Area


Return to Circuits, schematics and manuals

Who is online

Users browsing this forum: No registered users and 2 guests