Audax RH5 manual
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
Audax RH5 manual
If someone could point me in the right direction for one, I'd greatly appreciate it.
Regards
Regards
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
Re: Audax RH5 manual
problem solvedpetermontg wrote:If someone could point me in the right direction for one, I'd greatly appreciate it.
Regards
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
there wasnt a manual as such, just a small leaflet with basic info on the headfolk wrote:did you find a manual? We need to service ours and I'm wondering if it's possible to DIY
i have been meaning to post it here but keep forgetting. ill do it soon.
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
IMPEDANCE: 8 - 15- 500 OHMS.
SENSITIVITY: APPROXIMATELY 1.8 WATTS AT 1000 CYCLES FOR 6.3 CM/SEC PEAK RECORDED VELOCITY.
FREQUENCY RESPONSE: +2 DB FROM 1000 TO OVER 13,000 CYCLES. FROM 1000 DOWN TO 30 CYCLES, BUILT-IN ATTENUATION PER R.I.A.A CURVE WITHIN 3 DB.
DISTORTION: 1.2% AT 1000 CPS.
MOUNTING: UNIVERSAL MOUNTING FOR MOST LATHES. 1 1/8" BETWEEN MOUNTING HOLES OF CUTTER.
STYLUS:
SHORT SHANK 5/8" OVER-ALL STYLUS LENGHT.
its not much, but thats all the info that came with the head.
hope it helps somebody.
regards
SENSITIVITY: APPROXIMATELY 1.8 WATTS AT 1000 CYCLES FOR 6.3 CM/SEC PEAK RECORDED VELOCITY.
FREQUENCY RESPONSE: +2 DB FROM 1000 TO OVER 13,000 CYCLES. FROM 1000 DOWN TO 30 CYCLES, BUILT-IN ATTENUATION PER R.I.A.A CURVE WITHIN 3 DB.
DISTORTION: 1.2% AT 1000 CPS.
MOUNTING: UNIVERSAL MOUNTING FOR MOST LATHES. 1 1/8" BETWEEN MOUNTING HOLES OF CUTTER.
STYLUS:
SHORT SHANK 5/8" OVER-ALL STYLUS LENGHT.
its not much, but thats all the info that came with the head.
hope it helps somebody.
regards
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.