Schematics for a M/S cod/dec console

[motorino]

Hi trolls!

I missing schematics for made a console, any help?

Cheers

[motorino]

Some block diagram on how to encode and decode the balanced signals and the point where you can insert?

Any help?

[motorino]

I understand that l and r must be add on one side and on the other side rest L and r, and process with comp etc but I do not know is back to turn this into stereo

Any help please?

Cheers

[markrob]

Hi,
If I understand corerectly, you want to know how to encode, process and decode MS.

To encode:

Mid = L+R (This is just the mono sum)
Side = L-R (The out of phase information)


You can process either signal as desired.

To reform the stereo:

L = Processed Mid + Processed Side (L+R) + (L-R) = 2L

R = Processed Mid - Processed Side (L+R) - (L-R) = 2R

Hope this helps.

Mark

[motorino]

Many thanks Mark! Now i understand

Cheers

[Nickou]

http://www.megaupload.com/?d=DTZ06NFW

this is a link to dowload the schematics of the sp72
look at the EE66 card , you have a example of a mid/ side encoder decoder with a high pass filter in the side before the recoding in L/R

or this page
http://www.proaudiodesignforum.com/forum/php/viewtopic.php?f=7&t=262&sid=601688d2aa24a7f23c6777e7e9288377


I built it and it works

Yann

[motorino]

Ouh Yeah!! http://www.ka-electronics.com/KAelectronics/MS_Matrix/MS_Matrix.htm
Muchas gracias por la ayuda Yann!

[Nickou]

the same thing , but passive , done with transformers

[Nickou]

another schema which can inspire you ... I don t have the copyright but ...

[motorino]

Yeah!
The transformers inspired me a lot too!
Many many thanks!
Y una cosa más, por mi parte puedes estar tranquilo en el tema de los derechos de autor jajaj