User avatar
mossboss
Posts: 2050
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

Neumann VMS Half Speed Cutting Equilisers SP 7? consoles

Post: # 5470Unread post mossboss
Mon Jun 22, 2009 8:38 am

Hi all
I am looking for schematics or the actual 4 equiliser boards that where offered in the early 80's, 81-82 for half speed cutting
They where add ons to all consoles except the 80 series as they had them built in
I have a graph from Neuman that shows the required curve
It starts at 3 HZ with a bit under a 3dB boost drops to zero at around 400 HZ
it boosts 1 dB between 700 to 1 k than goes up to 7.5 k with almost a straight line boost of 8 dB it drops off at that
All up 4 of them, 2 for the preview and 2 playback Never seen them offered anywhere or heard/read any discussion about them
Anyone???
Cheers

User avatar
dkmastering
Posts: 14
Joined: Thu Aug 26, 2010 2:28 pm
Location: France - Paris
Contact:

Re: Neumann VMS Half Speed Cutting Equilisers SP 7? consoles

Post: # 50772Unread post dkmastering
Sat Jul 07, 2018 11:38 am

hello. I never seen those eqs. for half speed. You have a graph of the curve?

It could be great if you could put a copy of this graph.

musicaly.
Hervé

Post Reply