User avatar
the record cutter
Posts: 2
Joined: Wed Feb 11, 2009 6:15 am

SX-74 Cutter-head schematics

Post: # 4439Unread post the record cutter
Wed Feb 11, 2009 6:32 am

Anybody have any detailed schematics of an SX-74 cutter-head.
My memory is starting to become unreliable!! lol

User avatar
Nickou
Posts: 278
Joined: Mon Jun 01, 2009 1:09 pm
Contact:

Post: # 5484Unread post Nickou
Wed Jun 24, 2009 5:07 pm

http://www.megaupload.com/?d=BE94CUE6

you will find some info , but not everything ...!

flozky knows more ....

User avatar
mossboss
Posts: 2050
Joined: Sun Jul 01, 2007 8:18 am
Location: Australia.

Re: SX-74 Cutter-head schematics

Post: # 5819Unread post mossboss
Tue Jul 28, 2009 8:23 pm

the record cutter wrote:Anybody have any detailed schematics of an SX-74 cutter-head.
My memory is starting to become unreliable!! lol
Fair request one supposes!

Previous post :roll:

Posted: Wed Feb 11, 2009 6:21 am Subject: New Guy! Neumann user
Im currently offering the service of rebuilding SX-74 cutterheads and Neumann Disk cutting systems..... anybody interested
Cannot work this one out :?
Cheers

User avatar
Aussie0zborn
Posts: 1822
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:

Post: # 5843Unread post Aussie0zborn
Thu Jul 30, 2009 6:39 am

Try buying the CD-ROM on Ebay ... it may contain the information you want.

User avatar
blacknwhite
Posts: 483
Joined: Thu Apr 24, 2008 2:57 am
Location: US

Post: # 5848Unread post blacknwhite
Thu Jul 30, 2009 11:13 am

Aussie0zborn wrote:Try buying the CD-ROM on Ebay ... it may contain the information you want.
I bought it. It doesn't contain info on what's inside the cutterhead. But it does contain info on the external electronics, and some (not all) of the "user-accessible" (without dis-assembly) mechanics of the lathe.

- Bob

User avatar
cohearent
Posts: 67
Joined: Sat Jul 11, 2009 4:58 pm
Location: California, USA
Contact:

Post: # 9223Unread post cohearent
Tue Jun 08, 2010 10:42 am

The SX-74 has 2 drive coils, two feedback coils and a pair of heater connections. Are you just asking for the pin-out?
Kevin Gray

Post Reply