Rek-o-kut M-12 and R-8A wiring diagrams / help
Hello All,
Just picked up a M-12 cutter on a TR-12H turntable along with the R-8A amp via local auction. It was disassembled, so I need some help wiring it and getting it going again.
Does anyone have wiring diagrams or schematics for these?
I've got it just about back together; turntable is on and running, amp lights up and appears to be working, but I'm unsure where to run the wire from head to on the amp. As well, there is an xtal / magn switch on the back of the amp, and not sure what position it should be in.
Thanks for any help, advice, or manuals.
Just picked up a M-12 cutter on a TR-12H turntable along with the R-8A amp via local auction. It was disassembled, so I need some help wiring it and getting it going again.
Does anyone have wiring diagrams or schematics for these?
I've got it just about back together; turntable is on and running, amp lights up and appears to be working, but I'm unsure where to run the wire from head to on the amp. As well, there is an xtal / magn switch on the back of the amp, and not sure what position it should be in.
Thanks for any help, advice, or manuals.
Re: Rek-o-kut M-12 and R-8A wiring diagrams / help
Hi!
I’ve attached a photo of the Rex-O-Kut R-8A amp.
I took this photo while I was rebuilding mine.
Hope this helps you.
Bill
I’ve attached a photo of the Rex-O-Kut R-8A amp.
I took this photo while I was rebuilding mine.
Hope this helps you.
Bill
You do not have the required permissions to view the files attached to this post.
Re: Rek-o-kut M-12 and R-8A wiring diagrams / help
Bill, I have been looking for this days. Thank you so much for sharing this!
Re: Rek-o-kut M-12 and R-8A wiring diagrams / help
Thanks for the uploaded schematic. Is there any chance of taking 2 (or more) overlapping photos of the schematic such that the
resistor values and the like would be readable? As such, when I zoom in, the values become too pixelated to read. This picture is only a 600 by 450 resolution photo, and a magnifying glass is no help, either. I hate to be so picky. If you can't re-take sectional pictures,
what you have presented is still appreciated, anyway. js
resistor values and the like would be readable? As such, when I zoom in, the values become too pixelated to read. This picture is only a 600 by 450 resolution photo, and a magnifying glass is no help, either. I hate to be so picky. If you can't re-take sectional pictures,
what you have presented is still appreciated, anyway. js
- Stevie342000
- Posts: 497
- Joined: Mon Dec 21, 2009 2:12 pm
Re: Rek-o-kut M-12 and R-8A wiring diagrams / help
Pretty sure the full manual is on this link (you just need to scroll through the topics or do a search on the forum) and if that fails then Google is your friend.....Rek-o-Kut Imperial might help to find it as well.
Re: Rek-o-kut M-12 and R-8A wiring diagrams / help
Another question to Bill: Was the R-8A schematic pasted on the amp's bottom cover plate? The cover plate is missing on the amp that
I'm working on. It's possible the missing cover will create another problem. Along with the (possibly) missing schematic, there could be some introduction of hum. I hope not. js
I'm working on. It's possible the missing cover will create another problem. Along with the (possibly) missing schematic, there could be some introduction of hum. I hope not. js
Re: Rek-o-kut M-12 and R-8A wiring diagrams / help
I found a clear, re-worked REK-O-Kut Challenger R-8A schematic this site http://kjq.us.com/rekokut.html
There's also a link to a person who rebuilds cutting heads.
There's also a link to a person who rebuilds cutting heads.