Mono Cutterhead Repair
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Re: Mono Cutterhead Repair
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
- tapesandtubes
- Posts: 55
- Joined: Tue Nov 17, 2015 11:12 am
- Location: Philadelphia, PA
- Contact:
Re: Mono Cutterhead Repair
Hello! I just wanted to say that I recently had Todd restore my Presto 1D and it's amazing. He does a tremendous job--very meticulous and professional. If you have a head that needs repair, don't hesitate to get in touch with him. Now I need to send him my Presto 1C...
Presto K8 | 6N
Re: Mono Cutterhead Repair
4-18-2017 Cutterhead Rebuild Log
Full rebuilds of the following types of mono cutterheads for audio disc recoding: Presto 5-C, Presto 1-B, Presto 1-C, Presto 1-D, Recordio, Audax RH5, Audax R56, Grampion D, Thorens Type G15, RCA MI-4887, RCA MI-4889, and Olson.
Full rebuilds of the following types of mono cutterheads for audio disc recoding: Presto 5-C, Presto 1-B, Presto 1-C, Presto 1-D, Recordio, Audax RH5, Audax R56, Grampion D, Thorens Type G15, RCA MI-4887, RCA MI-4889, and Olson.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Mono Cutterhead Repair
I am the very happy recipient of one of Todd / opcode's most recent batch of cutterhead repairs. My Presto 1D now literally looks brand new and is cutting loud, clear cuts (and now with BASS!) and has a much extended frequency response, in addition to being rewound to 8 ohms to work with modern amps. The level of attention to detail is just incredible, down to cloned tiny mm sized set screws, newly fabricated parts including the damper and more. Very cool that he also sends you pictures of the process along the way and a video showing the completed head being tested. Seriously can't recommend enough, and that's before you see the incredibly reasonable invoice for the repair.
Thanks Todd!!
Thanks Todd!!
Re: Mono Cutterhead Repair
I'm taking repairs again. Price has increased. Quality has also.
I can no also fully rebuild Neumann SX cutterheads. Including feedback coils and transducer springs. I can in fact clone the entire transducer if necessary.
I can no also fully rebuild Neumann SX cutterheads. Including feedback coils and transducer springs. I can in fact clone the entire transducer if necessary.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Mono Cutterhead Repair
Some picture updates! Full Presto Rebuilds are now $400. I can replace coils on heads I've already fully rebuilt for $200. I'm also considering selling coil clones by themselves. However, I have news forthcoming that will make that no longer necessary. Get excited because I'm about to offer a very cool head. And, I'm not talking about Mantra V2. Essentially, this will make any Presto head obsolete and not even worth buying!
Neumann SX Drive coil Bare Neumann SX Feedback Coilform Presto 1-D Rebuild My New Presto Coil Clones
Neumann SX Drive coil Bare Neumann SX Feedback Coilform Presto 1-D Rebuild My New Presto Coil Clones
You do not have the required permissions to view the files attached to this post.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Mono Cutterhead Repair
Taiwan Full Rebuild Job
RCA MI-4889 before and after video with bench test
RCA MI-4889 before and after video with bench test
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
- Ethic Studios
- Posts: 8
- Joined: Fri Apr 09, 2021 1:35 am
Re: Mono Cutterhead Repair
What's Todd's Contact and how much he charge? we're looking for a upgrade service repair for our cutting head for a Presto K-8 machine we want to upgrade it to a Presto 1C please help us outtapesandtubes wrote: ↑Wed Jan 11, 2017 9:14 amHello! I just wanted to say that I recently had Todd restore my Presto 1D and it's amazing. He does a tremendous job--very meticulous and professional. If you have a head that needs repair, don't hesitate to get in touch with him. Now I need to send him my Presto 1C...
Thanks in advanced
Ethic Studios
- Ethic Studios
- Posts: 8
- Joined: Fri Apr 09, 2021 1:35 am
Re: Mono Cutterhead Repair
we're looking for a upgrade service repair for our cutting head for a Presto K-8 machine we want to upgrade it to a Presto 1C please help us out
Thanks in advanced
Thanks in advanced
Re: Mono Cutterhead Repair
Hi There,
Telephone = 00 1 (312)-593-0249
Ask this man, or even easier, Contact Mike Dixon (PIAPTK) here on the forum
Hope this helps
Regards Soulbear
http://deepgroovesmastering.com/Ethic Studios wrote: ↑Thu Apr 22, 2021 4:30 amwe're looking for a upgrade service repair for our cutting head for a Presto K-8 machine we want to upgrade it to a Presto 1C please help us out
Thanks in advanced
Telephone = 00 1 (312)-593-0249
Ask this man, or even easier, Contact Mike Dixon (PIAPTK) here on the forum
Hope this helps
Regards Soulbear
- Ethic Studios
- Posts: 8
- Joined: Fri Apr 09, 2021 1:35 am
Re: Mono Cutterhead Repair
Thanks greatly appreciate
- Ethic Studios
- Posts: 8
- Joined: Fri Apr 09, 2021 1:35 am
We need a Presto K-8 Amp Restoration Service
Does Mike Dixon also Restortion for the presto k-8 amp we desperately need service for this machine