I have a T560 cutter head and needs a repair as one of the tweeters sounds blown, possibly even both, but either way I assume both will need replacing.
I have been going through the diy repair approach but with limited skills in this area I'd rather send to someone, also I know how long Souri can take (if i get a reply) so wondered if there is anyone on here who can help? Ideally based in Europe.
Thanks
T560 Cutterhead Repair
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Re: T560 Cutterhead Repair
Hey, I have the same problem. Burned one channel, need repair. And had enough of Souri's support, searching for someone else who can fix it properly. But most people don't want to get involved in what they don't understand. I'm afraid that this reverse engineering might take it to full makeover of cutterhead. And since its not working and maybe there will be no way out just to make our own. Maybe have any ideas what kind of electromagnets/drives are used? and how did your repair go?
Re: T560 Cutterhead Repair
You have a PM Teddy.