Stereo Mastering Lathe Wanted
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- trailerparkjesus
- Posts: 205
- Joined: Fri Mar 03, 2017 4:55 pm
Stereo Mastering Lathe Wanted
Hey Trolls,
Looking for stereo mastering lathe for under 50k, preferably lower than that. I know, it is a shot in the dark but why not see if someone is looking to sell.
Needs depth control (not just spring adjustment but solenoid), variable pitch, vacuum system, heat, vacuum plater, head and amps, all the bells and whistles
Looking for stereo mastering lathe for under 50k, preferably lower than that. I know, it is a shot in the dark but why not see if someone is looking to sell.
Needs depth control (not just spring adjustment but solenoid), variable pitch, vacuum system, heat, vacuum plater, head and amps, all the bells and whistles
- helloheathen
- Posts: 8
- Joined: Tue Jun 25, 2019 3:13 pm
Re: Stereo Mastering Lathe Wanted
Kind of off from what you are asking - but close. I have an 8DG that was rebuilt by Mike and Kris. 33/45 motor - pulley belt system for LPI control. Also have the vacuum and heater wire controllers. Could easily take any head that you get because it's over arm swivel. let me know if you are interested.
- petermontg
- Posts: 610
- Joined: Sat Jun 26, 2010 7:51 am
- Location: Ireland.
Re: Stereo Mastering Lathe Wanted
Jesus agnew had links to a VMS sometime back. check in with him and check in with flo. Another VMS for sale in Europe, for the life of me I cant remember where.
Best
Peter
Best
Peter
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.
+353(0)894926271
peter(at)petermontgomerymastering.com
Stereo cutter head wanted. Send email or smoke signals.