Stereo Lathe Equipment for sale (Vinylium, Vinyl Recorder etc.)

[Snut]

Dear Trolls,

it is with soul-piercing, heart-breaking, gut-wrenching pain, that I write these words. I sadly never found the strength to post on the forum, but I met some of the most inspiring people imaginable here and I cherished every discussion and every PM shared during those past years (or decade? I can't remember). I learned so much and for the first time in my life found something I was doing just for me: goosebumps, butterflies, tingling sensations in all sorts of body-parts. Unfortunately I am facing an utterly dire situation at the moment, as I got no renewal of my contract from my university while at the same time being new to take full time care of my elderly parents due to medicinal problems. As I have no relatives I really need to hire a part-time care taker as I lack the strength to handle this all on my own without being ground down myself. I am not longer able to pay for my studio nor do I find the time or headspace to experiment and nerd out with my beloved gear. I hope that someone here can put it to better use!

I am offering the following items:

Vinyl Recorder
Platform to fit a Technics 1200/1210 type of turntable
Overhead unit
Cutterhead
"Main Unit" (RIAA-encoder, groove controller, stylus heating regulator)
Power Supply Unit
Mixer
Level-meter
Phase correlation meter
Vinyl optimizer unit
Groove distance controller
Monitor switch unit
Precision Motor
Precision Platter
Half-speed adapter
Reverse Module
Pump and Chip-jar suction system
Amp

A smaller amount of black VR blanks in a variety of sizes
Diamond styli (2 resharpened and not used again, 1 new)

Vinylium Switzerland
Dubplate cutter unit (including case)
SC-99 head (barely used, tested)
VC200
converted Dubplate cutter overhead (basically a Vinylium Dubplate cutter that has been converted to be an overhead to cut 14" and has a suction tube installed, bought here, works like a charm)

Vinylium Belgium
900+ plastic blanks transparent (I do not know what they are made of)
Sleeves

Transco/ Apollo
1.5 Boxes of 10" Dubplates
an assortment of sapphire and ruby styli (used and unused)

add ons
3 diamond styli (resharpened and not put use
vacuum platter 12" in stainless steel (manufactured by a very cunning and well-respected user of this forum)
Thorens Vacuum mat

Technics
Technics SP-10 MKIII (MK3) + Power supply (very nice condition except for a scratch on the surface)

Keith Monks
Record cleaning machine
Twin Record cleaning machine


If I find more gear in my storage, I will of course update the list!

All in all a motivated person could build a nice hobby-unit for some briccolage and experimentation I guess. The equipment was not put to much use. The Vinylium Switzerland items were tested at Vinylium. The VR items I as not able to test as I am not a first hand customer.
Everything is located in Zürich, Switzerland and a local pick-up would really be preferred over shipping.

I do not have a price in mind as I never thought that I would sell this stuff I painfully collected step by step over years, offers, therefore, would be much appreciated. I am not looking to get rich or hit the highest possible price, due to the circumstances mentioned above, however I can not let it go for free.

I would be glad if these items spark some interest among you guys and and finally find a loving new home where they get the attention and appreciation they deserve and I am not able to provide at the moment. If someone is interested I would be more than happy to discuss a possible sale via phone, I however am hesitating to post my number/IG/mail publicly, so maybe just PM me? I speak english, french, german, latin a little italian, spanish, romanian and greek; for other languages I will sadly have to use a translator.

Thank you for your interest but most and foremost for the inspiration, laughs and intersting discussions during the past decade+,I love you guys from the boogedy bottom of my heart!

[YOUYOU2021]

hello.

I am very interested in the transfer equipment you posted, please quote me separately, is it two sets of vinyl recorder equipment? Swiss vinyl
Dubplate cutting device
SC-99 head
VC200 feedback power amplifier

Please include photos and prices.

My E-mail address is luyindai@163.com. Thank you

[Snut]

Thank you so much for your interest!

I will try to provide photographies of these items as soon as possible. Please forgive me if it takes a couple of days, I try to hurry up.
Also I would be excited to get your ideas of a price (offer) as a starting point of a possible discussion. That would be appreciated.

[leemichael]

What’s your location?
Interested in the SP10

[JHL]

can you post some picture about the vinylium please? really want to see how it become a overhead that can cut on a 14"

[LondonCollins]

Hi
I'm also very interested in your gear.
How can I get in touch with you?
Many thanks
Brian

[PTV]

Hi there,
I am very interested in most of this gear.
Please DM me your email address and I can make you an offer.

[marsh]

Hey Snut, i sent you a private message. Feel free to msg me if you cannot find it. I want to make an offer to collect from Switzerland. Thanks.

[Alfred]

Hi Snut, is there any gadget available?.I am interesting in the stylus..
Thanks

[talbanjean]

Hi snutt i’m interested in the réd vinillium Witherspoon amp where do YouTube Liverpool in. I personnally stay in France thank YouTube for forwarding

[dubplatecutter]

Halllo Snut. Ruf mich doch bitte mal an. 078 888 10 40. Vielen Dank. Grüess'di, Peter

[LondonCollins]

Hi. Is this post still working?

[misjah]

Hi. Is this post still working?

nope

[talbanjean]

Still wishing to recieve pics of your diy overhead and hardware thx

[Snut]

Sorry. Due to the health issues mentioned I was away full time in hospital until I myself got sick. I apologiuze deeply and try to answer every request asap. I try to get in as many as today.

[Snut]

I hope I've got y'all PM'd. Otherwise give me a quick shout please. I again would like to apologise from the bottoom of my heart for the silence. Having a bad time shouldn't make me a bad tradesman. I'll give my all to stay on top of things. Again: sorry.

[misjah]

Hi Raoul,

sent you some emails long time ago. pls check.

misjah

[misjah]

We emailed a bit back in December, i received an old photobucket pic of “the previous owner”. After i offered to drive up for a cash deal he disappeared and now after numerous messages and emails, silence. I’m not saying this is a definite scam but i smell fish. Good luck to you all and be warned!

[talbanjean]

dear snut pls join me on whatsapp about your gear
00(33) 628 958 122
Greatings

[talbanjean]

Pls feel free to call me on whatsapp
Home to find you well
Cheers