Any use for 3.15" polycarb discs?

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
displacedsnail
Posts: 22
Joined: Sat Aug 12, 2023 8:34 am
Location: Philadelphia, PA
Contact:
Contact displacedsnail

Any use for 3.15" polycarb discs?

Post: # 63733Unread post displacedsnail
Wed Nov 22, 2023 11:22 am

Hello all,

I recently had a few sheets of "0.06 (1.5mm) polycarb cut and figured I'd have a bunch of 3.15" discs cut from the scrap just in case my machine could emboss onto them, but alas, no such luck. Anyone have any use for them? I'll probably hang onto some just for fun or craft stuff, but if your machine can emboss on them and you have any interest, lmk. Happy to send them out for free, shipping covered would be appreciated. I'd much rather they go to someone who can use them than sit in my closet for a few years before throwing them out.
3inchdiscs.jpg
- Joe
displacedsnail.com
You do not have the required permissions to view the files attached to this post.
Top

Click Here!

Post Reply