Stereo dynamic cutting head FOR SALE

[Naboo]

questions are welcome

I don't make styli, just tested using a friend's. think it was one from myshank

[Fuzzbox]

What kinda tweeters are they?

Thanks

[Naboo]

What kinda tweeters are they?

Thanks

That's one thing I'll keep to myself as I plan to sell some heads down the track once the final design is finished..
Lets just say they're more powerful with better range than the T560, and definitely cost a fair bit more

[Naboo]

Ouch, Styli don't like being bitten...imo

Seemed like this is how the T560 does it, and the taper on the shaft is so shallow that it's barely a bite, more of a firm grab

interesting, I didn't realise this was how some were done. so do you make your own styli for this?

sorry for all the questions, despite being interested for a decade I'm still yet to see a lathe in person so am uncertain how they go together

I don't make my own stylus unfortunately.. would be awesome to be able to
the torque tube.. I actually tend to file out the hole slightly with a tiny round file until the stylus fits nicely, so to be honest it probably ends up slightly tapered

[Naboo]

same as above version, but has had tweeter surrounds cut open and urethaned back together.
not the tidiest but it functions - don't really see under there when it's operational.

can send videos of each side passing signal if wanted.

same as last time. no stylus. will need to make your own counterweight, and wiring may need reconfiguring for your machine.

$600 NZD - to cover materials... plus freight to wherever

feel free to PM

[Fuzzbox]

Message sent

[Naboo]

TEST HEAD STILL AVAILABLE

same as above version, but has had tweeter surrounds cut open and urethaned back together.
not the tidiest but it functions - don't really see under there when it's operational anyway..

can send videos of each side passing signal if wanted.

same as last time. no stylus. will need to make your own counterweight, and wiring may need reconfiguring for your machine.

$525 NZD - to cover materials... buyer to pay freight to wherever

Send a PM if interested,
Thanks

[2043]

I would like to have it Brandon.
PM sent...

[2043]

Still available, I spoke too soon.
Very nice head Brandon!

I would like to have it Brandon.
PM sent...

[Naboo]

***** Both SOLD now *****

Cheers all for the interest