Custom 12” jacket printing?
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Custom 12” jacket printing?
Hi, I’m looking for custom one-off 12” jacket printing. I contacted a couple leads I saw here but no one got back to me. Does anyone know of anyone actively doing this?
Re: Custom 12” jacket printing?
You can probably do it yourself at a local print shop that has a large format printer. Something that prints off a cardstock roll with at least a 13" width. Just use a template from a pressing plant and then cut and trim it down yourself and glue the wings and fold it over (using a bone scorer helps a lot). Unfortunately large format prints are pretty expensive. Even DIY you are looking at $6-7 each plus your time. Unless you want to buy a large format printer. They are $650-800 on Amazon.
You could also buy 12x18" adhesive paper and adhere it to a blank sleeve (Most print shops can print 12x18") but you need two prints and they are not as cheap as 11x17 full color prints.
You could also buy 12x18" adhesive paper and adhere it to a blank sleeve (Most print shops can print 12x18") but you need two prints and they are not as cheap as 11x17 full color prints.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Custom 12” jacket printing?
Thats exactly the price that my local print shop was asking!
Epos Laboratory Phono Cartridge Retip & Lathe Cuts
http:\\www.eposlab.gr
info@eposlab.gr
IG EposLab (https://www.instagram.com/eposlab/?hl=en)
http:\\www.eposlab.gr
info@eposlab.gr
IG EposLab (https://www.instagram.com/eposlab/?hl=en)
Re: Custom 12” jacket printing?
Yeah, its not a cheap proposition. Thats why i personally prefer to ditch “professional looking” jackets (which never look as good as a pro printed mass produced sleeve) and go a more handmade artsy vibe. I use my cricut cutter a lot to diecut sleeves.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Custom 12” jacket printing?
Hey Aaron,
we do print one-off 12" Covers at drdub.com. Were situated in Austria. check drdub.com and drop us a mail if you need one.
best regards,
Markus
we do print one-off 12" Covers at drdub.com. Were situated in Austria. check drdub.com and drop us a mail if you need one.
best regards,
Markus
Re: Custom 12” jacket printing?
I might be able to help. I print 12 inch jackets for around $5 a piece. But they are definitely not as heavy as your standard record jacket.