REK-O-KUT Capstan and rubber rollers
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
REK-O-KUT Capstan and rubber rollers
Fellow trolls, do you know of anyone who would re-built or sell Rek-O-Kut capstans and rubber? My lathe rumbles too much at 33 rpm.
Thanks.
Michaela
Thanks.
Michaela
Re: REK-O-KUT Capstan and rubber rollers
Check with Terry's Rubber Rollers on your idler. What's wrong with the capstan? Bent? Gouged?
Re: REK-O-KUT Capstan and rubber rollers
Well - I can't be sure if it needs to be replaced. But it's always a good idea to replace it after .. well 50 years or so.rsimms3 wrote:Check with Terry's Rubber Rollers on your idler. What's wrong with the capstan? Bent? Gouged?
mm.
- uvoscillator
- Posts: 129
- Joined: Wed Aug 22, 2012 1:37 am
- Location: Russia, St.Petersburg
Re: REK-O-KUT Capstan and rubber rollers
Mine was done by Ed Crockett from
VINTAGE ELECTRONICS
9 CRANE PARK
HATTIESBURG, MS 39402
Can't find his site...
Cheers !
S
VINTAGE ELECTRONICS
9 CRANE PARK
HATTIESBURG, MS 39402
Can't find his site...
Cheers !
S
Best !
Re: REK-O-KUT Capstan and rubber rollers
what model is your Rek-o-Kut?
Re: REK-O-KUT Capstan and rubber rollers
It's a TR-12Gus wrote:what model is your Rek-o-Kut?
m.