vms 80 Neumann Joana Polinska Replica Clone

Distinct from the "Members Only" section about business disputes, this is a section for those special few sellers who have distinguished themselves through clearly intentional efforts to scam multiple customers. If you intend to start a thread here, please check it with Steve E. first.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

User avatar
mischmerz
Posts: 273
Joined: Thu Jul 02, 2015 8:23 pm
Location: Houston. Tx
Contact:

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42529Unread post mischmerz
Tue May 17, 2016 10:06 am

Well - I started a thread about that a few weeks ago and decided, not to buy this "system". Even before I didn't expect the system to work, I didn't expect the cutting head to be useful. All I wanted was some basis I could use to build upon. The situation is difficult from my perspective: While there are plenty of people working on different cutter head designs, nobody really works on a new lathe design. We're stuck with stuff that is either 60 years old or too expensive. Though it must seem to be a trivial task for some of you, not everybody (me included) is able or willing to build a working overhead. This is why I thought about the Polinska clone. Not to have a cheapo Neumann - but to have a platform that might be viable as something one could use to built a lathe. In the end I was too chicken to buy it.

Michaela

User avatar
petermontg
Posts: 610
Joined: Sat Jun 26, 2010 7:51 am
Location: Ireland.

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42531Unread post petermontg
Tue May 17, 2016 11:53 am

Wait for flo's system better value for money. Don't be buying this muck.
Monies are hard earned and should be harder to part with. You are on the right path.
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com

Stereo cutter head wanted. Send email or smoke signals.

User avatar
tragwag
Posts: 1259
Joined: Wed Jun 22, 2011 2:30 pm
Location: Providence, RI USA
Contact:

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42638Unread post tragwag
Mon May 23, 2016 1:33 pm

check out this thread on some promising new lathe building by the forum's own Sillitoe:
http://www.lathetrolls.com/viewtopic.php?f=15&t=5645
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com

User avatar
mischmerz
Posts: 273
Joined: Thu Jul 02, 2015 8:23 pm
Location: Houston. Tx
Contact:

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42641Unread post mischmerz
Mon May 23, 2016 2:41 pm

Doesn't look like he's going into the lathe building business.

m.

User avatar
Sillitoe
Posts: 421
Joined: Wed Apr 30, 2014 8:30 pm

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42646Unread post Sillitoe
Mon May 23, 2016 7:01 pm

Hey thanks Tragwag!

Yes I am indeed in the lathe building business.

Pricing and availability update soon :wink:

Cheers
James

User avatar
mischmerz
Posts: 273
Joined: Thu Jul 02, 2015 8:23 pm
Location: Houston. Tx
Contact:

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42647Unread post mischmerz
Mon May 23, 2016 7:08 pm

Sillitoe wrote:Hey thanks Tragwag!

Yes I am indeed in the lathe building business.

Pricing and availability update soon :wink:

Cheers
James
Well .. I am interested.

m.

User avatar
Sillitoe
Posts: 421
Joined: Wed Apr 30, 2014 8:30 pm

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42648Unread post Sillitoe
Mon May 23, 2016 7:12 pm

Great! :D

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42700Unread post sakuszi
Thu May 26, 2016 2:01 am

Poland VMS80SX foto pdf
You do not have the required permissions to view the files attached to this post.

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42701Unread post sakuszi
Thu May 26, 2016 2:04 am

Poland VMS80SX ,500$
You do not have the required permissions to view the files attached to this post.

User avatar
mischmerz
Posts: 273
Joined: Thu Jul 02, 2015 8:23 pm
Location: Houston. Tx
Contact:

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42702Unread post mischmerz
Thu May 26, 2016 2:08 am

So - tell us more. What part came with the lathe, what part is working and what part aint?

Michaela

User avatar
The Shank
Posts: 338
Joined: Tue Jun 15, 2010 11:02 am
Location: France
Contact:

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42703Unread post The Shank
Thu May 26, 2016 2:12 am

Stop doing publicity for that. It's a scam
http://www.myshank.com
skype : steven.myshank

* Diamond cutting stylus officials/prototypes
* Resharpening services
* Blank records
* Cutting lathe

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42705Unread post sakuszi
Thu May 26, 2016 2:32 am

the entire work automation, variable pitch and depth I had to buy a pump vacum to the plate ,chip , I was a little shocked because it is a complicated device, the engine is actually very strong and quartz motor , direct drive pitch, an automatic knife pressure, raising the head and lowering automatic. It took me some time because all the elements were untwisted, the instruction is very modest, all I had to adjust, [without regulation, you can tear off the driving pitch screw is very dynamic pitch shift]. All is not adjusted, it will take me a little time, but the basic functions work properly. In it there are no switches to stop and return of head, but it is the transmitter encoder potentiometric and he performs all the functions of the position supenssion head. Damn complicated driver [but fortunately I have diagrams]
Overall, the machine works good and record, but still a lot I have to learn. Soon I'll make a good movie on you tube


User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42707Unread post sakuszi
Thu May 26, 2016 2:39 am

The Shank wrote:Stop doing publicity for that. It's a scam
I do not do any advertising, it is not cheating in my case, I got the machine, I had to submit and it works, I did record lathe wood and heads of the speakers and records, that's what I bought now it is my space

User avatar
Sillitoe
Posts: 421
Joined: Wed Apr 30, 2014 8:30 pm

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42708Unread post Sillitoe
Thu May 26, 2016 2:43 am

Sakuszi, you bought this system??? After this???

http://www.lathetrolls.com/viewtopic.php?f=4&t=6171&p=39525#p39525

"I asked the seller, it seems to me that they are either not normal or something, it is not right. Seller told me that I sell this machine for $ 1000 plus shipping, but without the possibility of returning, additionally sent me a video of the execution, on film you can see how people in balaclavas man cut off his hand with the sword. Then the man wrote to me that if I do I'll send the machine and they will lose at least $ 1 transaction they will do the same thing, I cut my hand for stealing. The film is frightening was only a few minutes. You have to be very careful, these resellers are not safe. It is better not to risk :!:"

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42709Unread post sakuszi
Thu May 26, 2016 2:44 am

See, it's my design vinyl recorder https://www.youtube.com/watch?v=HhFhaE6WE3c


User avatar
Sillitoe
Posts: 421
Joined: Wed Apr 30, 2014 8:30 pm

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42711Unread post Sillitoe
Thu May 26, 2016 2:48 am

Yes, both very passionate about the VMS80 hahaha :lol:

User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42712Unread post sakuszi
Thu May 26, 2016 2:50 am

Sillitoe wrote:Sakuszi, you bought this system??? After this???

http://www.lathetrolls.com/viewtopic.php?f=4&t=6171&p=39525#p39525

"I asked the seller, it seems to me that they are either not normal or something, it is not right. Seller told me that I sell this machine for $ 1000 plus shipping, but without the possibility of returning, additionally sent me a video of the execution, on film you can see how people in balaclavas man cut off his hand with the sword. Then the man wrote to me that if I do I'll send the machine and they will lose at least $ 1 transaction they will do the same thing, I cut my hand for stealing. The film is frightening was only a few minutes. You have to be very careful, these resellers are not safe. It is better not to risk :!:"
but I like it very much and took a chance , $ 500 is not a fortune

User avatar
Sillitoe
Posts: 421
Joined: Wed Apr 30, 2014 8:30 pm

Re: vms 80 Neumann Joana Polinska Replica Clone

Post: # 42713Unread post Sillitoe
Thu May 26, 2016 2:54 am

Good for you buddy! :roll:

$500 for a working system is...

U
N
B
E
L
I
E
V
A
B
L
E
!!!
Last edited by Sillitoe on Thu May 26, 2016 3:04 am, edited 1 time in total.

Post Reply