NOISE

[msartori]

Can you help me to understand this type of noise?
Stylus new.( sharpened)
VR
beginning of a 10 inc ( https://mega.nz/file/iw4BSD7K#3JyRgGEEVnFEDRJS2-FEASBuY61kydNB02FluMHmHrE )
end of a 10 inc (https://mega.nz/file/X9ZAUaIQ#uXH7aKXY3wG6vI_sWBOwD-0Qszr9V6DHjVCm4BKznr8)

In the file you can hear the loudest noise at the beginning of the disc. (Beginning.mp3)
At the end of the record the noise is acceptable. (End.mp3)
I tried heating the stylus to 0.60 and heating the record to 35 degrees.
Room humidity 50%.
if the stylus needs to be sharpened, the noise is different and the sound is not good…
In this case, The sound is good but every now and then this noise comes back.
This noise drives me crazy.

[msartori]

stupid question?

[Sylvere]

hi,
0.60 on the Souri main unit ? cause graduation is 10 by 10 on the Unit !
Souri tell to heat the black at 40 45°!