Mss direct acetate recording machine
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- plasticpig850
- Posts: 12
- Joined: Wed Jan 06, 2016 2:02 pm
Mss direct acetate recording machine
Hi everybody, I haven't been on this site for a good while ,last time here, my machine works real good now,I'd just like to say a big thank you to stevie342000 and emidisc,real big help and input, thanks, I never took it all apart but all got a good clean etc. I've cut/embossed a few recording's all good really impressed, but one thing it won't do is the run out at end of recording, the rubber wheels in the little housing are too old ,it all sort of works then stops, as rubber wheels are so old I think its not disengaging the lead screw,so does any one know if someone in u.k.preferably in Sussex UK, if any one can help,best wishes Alan
- Stevie342000
- Posts: 497
- Joined: Mon Dec 21, 2009 2:12 pm
Re: Mss direct acetate recording machine
Terrys Rollers I think he is called but he is the US I think, try doing a search on line, usually comes under idler wheels for tape recorders.plasticpig850 wrote:Hi everybody, I haven't been on this site for a good while ,last time here, my machine works real good now,I'd just like to say a big thank you to stevie342000 and emidisc,real big help and input, thanks, I never took it all apart but all got a good clean etc. I've cut/embossed a few recording's all good really impressed, but one thing it won't do is the run out at end of recording, the rubber wheels in the little housing are too old ,it all sort of works then stops, as rubber wheels are so old I think its not disengaging the lead screw,so does any one know if someone in u.k.preferably in Sussex UK, if any one can help,best wishes Alan
- plasticpig850
- Posts: 12
- Joined: Wed Jan 06, 2016 2:02 pm
Re: Mss direct acetate recording machine
Hi stevie342000 thanks again for taking time to help, really good of you I might have to ship these wheels to America, but first I'm going to e-mail him some pictures of wheels as two of them must be 2" diameter , if he says he can do them ,which I dare say he can,I'll have my friend in lancing UK take them out, thanks again,