Hi from Oregon USA - 6N restoration
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- cheapthrills
- Posts: 32
- Joined: Wed Jun 10, 2015 10:26 pm
Hi from Oregon USA - 6N restoration
For the past year I've been trying to patch together a lathe using an overhead and various 'newer' turntables. Today, however, the lathe gods sent a special gift to my little shop in the form of a big gray case.
The person holding the case stated his 72 year old brother purchased the record cutter in the early 60s from a local country radio station, and it had been in the basement for at least 45 years. The record cutter is a Presto 6N serial #1900. Let the restoration begin...
The person holding the case stated his 72 year old brother purchased the record cutter in the early 60s from a local country radio station, and it had been in the basement for at least 45 years. The record cutter is a Presto 6N serial #1900. Let the restoration begin...
Re: Hi from Oregon USA - 6N restoration
I'm in eugene where are you?
<\\\\\\\\\\\\\\\\\\\\\[[[[[[[\/]]]]]]]\\\\\\\\\\\\\\\\\>
Recordette Sr.......Presto K-8
Recordette Sr.......Presto K-8
- cheapthrills
- Posts: 32
- Joined: Wed Jun 10, 2015 10:26 pm
Re: Hi from Oregon USA - 6N restoration
I'm in Portland, Oregon.
- EpicenterBryan
- Posts: 738
- Joined: Sun Aug 10, 2014 9:01 pm
- Location: Eugene, OR USA
Re: Hi from Oregon USA - 6N restoration
Welcome to the group!cheapthrills wrote:I'm in Portland, Oregon.
I'm in Eugene.
PM me.
Bryan
- onairmastering
- Posts: 2
- Joined: Thu Jun 30, 2016 3:33 pm
- Location: Portland, OR
- Contact:
Re: Hi from Oregon USA - 6N restoration
Hey man, how's the restoration project going? I'm in Portland and have been mastering for 8 years and would love to learn to cut, maybe we can get together? If you need help, let me know!
Re: Hi from Oregon USA - 6N restoration
hey - i'm also in portland oregon and very interested in learning to cut. i work as a live sound guy in town full time - would love to link up and learn anything. please contact me! im not on here often - so emailing or PM would be best.
-Jake
-Jake