Presto 1-D Part Dimensions
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Presto 1-D Part Dimensions
Hey,
Can anyone provide me with dimensions for any of the parts for a Presto 1-D?
I'm mostly interested in the armature and pole pieces, I've got the measurements for the bobbins, I've tried scaling from photos, but something still seems out.
Cheers.
Can anyone provide me with dimensions for any of the parts for a Presto 1-D?
I'm mostly interested in the armature and pole pieces, I've got the measurements for the bobbins, I've tried scaling from photos, but something still seems out.
Cheers.
Record Lathe Embossing Supplies - http://www.supplies.johnnyelectric.co.nz/
- Fela Borbone
- Posts: 271
- Joined: Thu Mar 07, 2013 5:22 pm
- Location: Valencia, Spain
Re: Presto 1-D Part Dimensions
Hope this helps.
Grid at the back is 1 mm per mark
Grid at the back is 1 mm per mark
You do not have the required permissions to view the files attached to this post.
- Fela Borbone
- Posts: 271
- Joined: Thu Mar 07, 2013 5:22 pm
- Location: Valencia, Spain
Re: Presto 1-D Part Dimensions
Not a great photographer, sorry
You do not have the required permissions to view the files attached to this post.
- Fela Borbone
- Posts: 271
- Joined: Thu Mar 07, 2013 5:22 pm
- Location: Valencia, Spain
Re: Presto 1-D Part Dimensions
Is 1-C, but i think 1-D is the same