Anyone used Staticide?

[trailerparkjesus]

Hey has anyone used Staticide before on the surface of PVC discs for cutting? Could be a good solution for the winter static season coming up!




https://www.amazon.com/ACL-Staticide-AntiStatic-Liquid-32/dp/B002WWNLVO?SubscriptionId=AKIAJD6FR5XRCBOC26MA&tag=ardorseo-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B002WWNLVO

[2bitcomputer]

Yep.
Been using it for years.
It definitely works.
I'd be interested in your/others' opinion of it...

[handcut]

+1

Works great, even when heavily diluted with deionised water.

[trailerparkjesus]

+1

Works great, even when heavily diluted with deionised water.

Thanks for the input! Going to try!

[discosdecorte]

Dear trolls,

Does anyone know where to get ACL Staticide in Europe?

Best regards,
Fer

[farmersplow]

I have been using this for years.

https://cramolin-shop.de/antistatik-spraydose-200ml.html

Without this spray, the cutting thread usually remains in the groove and is difficult to remove. The "crackling" noise is also almost eliminated.
Do not smoke as flammable, do not inhale, causes eye irritation, use only in well ventilated areas. So not for wimps!

[discosdecorte]

I have been using this for years.

https://cramolin-shop.de/antistatik-spraydose-200ml.html

Without this spray, the cutting thread usually remains in the groove and is difficult to remove. The "crackling" noise is also almost eliminated.
Do not smoke as flammable, do not inhale, causes eye irritation, use only in well ventilated areas. So not for wimps!

Thanks, mate!

Do you apply it while the disk is spinning and let it dry? Or does it need rubbing for drying?

Best regards,
Fer

[farmersplow]

Do you apply it while the disk is spinning and let it dry? Or does it need rubbing for drying?
Fer

Hi Fer!

A video says more than 1000 words:
So, I made a quick video for you:

1. dripping with wax
2. massage in the wax with a microfiber cloth
3. spray on antistatic
4. massage in with another microfiber cloth (or reverse side)

VIDEO:

Antistatic FP9.mp4

Greetings from Austria
Thomas

[discosdecorte]

Thank you very much, very kind of you!

BR,
Fer

[Fuzzbox]

Do you have to clean the records afterwards? I use antistatic for clothes from the store target. Works like a charm but leaves a residue. Need to wash of in sink with degreaser and microfiber rag.

[discosdecorte]

Hi!

I've finally tried with this spray and works great:

CRC 83009AF ANTISTATIK 100 200 ML

No need for rubbing or washing, it dries almost instantly

Best regards,
Fer