diy blank
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
diy blank
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: diy blank
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: diy blank
here is an a/b comparison of a cut i made on one of these blanks(pie plate bonded to old record)
this is the original file https://www.dropbox.com/s/es9ai8llqbxb3w3/I%20wish%20I%20could%20shimmy%20like%20my%20sister%20Kate%20-%20Jazzbo%27s%20Carolina%20Serenaders%20%20%281922%29.MP3?dl=0
this is the cut i did of the same file
https://www.dropbox.com/s/gj8s5baubtwxfe6/test%20cut.wav?dl=0
im embossing with weight using tungsten
cheers
fred
this is the original file https://www.dropbox.com/s/es9ai8llqbxb3w3/I%20wish%20I%20could%20shimmy%20like%20my%20sister%20Kate%20-%20Jazzbo%27s%20Carolina%20Serenaders%20%20%281922%29.MP3?dl=0
this is the cut i did of the same file
https://www.dropbox.com/s/gj8s5baubtwxfe6/test%20cut.wav?dl=0
im embossing with weight using tungsten
cheers
fred
Instagram @styluspressurerecords
Re: diy blank
thats so awesome your able to emboss on picnic plates.
everytime i try to emboss on them with tungsten it just shreds the plate up no matter how much weight i adjust or angle.
i just end up cutting them with those Russian shanks from ebay which seems to work ok with them.
everytime i try to emboss on them with tungsten it just shreds the plate up no matter how much weight i adjust or angle.
i just end up cutting them with those Russian shanks from ebay which seems to work ok with them.
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: diy blank
i cant cut them raw they bend like hell i have to stiffen them so hence the record sandwich
its way cheaper than polycarb and the diff in sound is not a deal breaker in fact i can get the plates louder
heres another test cut ripped strait from my numark pt1
https://www.dropbox.com/s/klcqcoll63n49ib/real%20gone%20crazy%20test%20cut.wav?dl=0
check my instagram
peace
its way cheaper than polycarb and the diff in sound is not a deal breaker in fact i can get the plates louder
heres another test cut ripped strait from my numark pt1
https://www.dropbox.com/s/klcqcoll63n49ib/real%20gone%20crazy%20test%20cut.wav?dl=0
check my instagram
peace
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: diy blank
Instagram @styluspressurerecords