Replicas

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Replicas

Post: # 32399Unread post ROLANDJAYS
Wed Nov 26, 2014 12:41 am

Here are some Grampian replicas im working on
You do not have the required permissions to view the files attached to this post.

User avatar
inspector77
Posts: 78
Joined: Mon Nov 17, 2014 10:59 am
Location: Málaga - Spain
Contact:

Re: Replicas

Post: # 32401Unread post inspector77
Wed Nov 26, 2014 4:11 am

looks great! What model is it?

regards

User avatar
dubcutter89
Posts: 361
Joined: Thu Oct 19, 2006 6:30 am
Location: between the grooves..

Re: Replicas

Post: # 32405Unread post dubcutter89
Wed Nov 26, 2014 7:27 am

Heavy Metal!!!

Finally somebody who is not blended by 3d printing... good luck!!!

Lukas

BTW: Do you also clone the Stylus-Set-Screw with english 10BA-Thread ?
Do you work from the docs or do you have a real one to work from?
Wanted: ANYTHING ORTOFON related to cutting...thx

User avatar
emidisc
Posts: 221
Joined: Mon Jun 07, 2010 7:57 pm
Location: lancashire

Re: Replicas

Post: # 32408Unread post emidisc
Wed Nov 26, 2014 9:41 am

They look good and not easy to do......I have tried.....keep us posted
I take it that is the D1 ? (BBC/Grampian)?

Paul

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Replicas

Post: # 32409Unread post ROLANDJAYS
Wed Nov 26, 2014 12:23 pm

Yes , its not easy . Im copying one that I have.
It will be a feedback head .
Im making everything original, no sense in changing what works.

I am doing the metal work and I have an expert friend who will be making the coils and assembling them and testing...

Maybe in a week or 2 I will have a finished one .

User avatar
opcode66
Posts: 2700
Joined: Sun Nov 08, 2009 10:56 pm
Contact:

Re: Replicas

Post: # 32419Unread post opcode66
Thu Nov 27, 2014 3:31 am

Fantastic work!
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio

User avatar
inspector77
Posts: 78
Joined: Mon Nov 17, 2014 10:59 am
Location: Málaga - Spain
Contact:

Re: Replicas

Post: # 32497Unread post inspector77
Thu Dec 04, 2014 4:09 am

Is there any progress on the project? I would see this head in action!

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Replicas

Post: # 32509Unread post ROLANDJAYS
Thu Dec 04, 2014 2:47 pm

Ya , I have some more done.
But ive been working on some audax replicas this week
You do not have the required permissions to view the files attached to this post.

User avatar
inspector77
Posts: 78
Joined: Mon Nov 17, 2014 10:59 am
Location: Málaga - Spain
Contact:

Re: Replicas

Post: # 32510Unread post inspector77
Thu Dec 04, 2014 3:13 pm

Amazing work!!! :shock:

User avatar
Snakeheadfishlab
Posts: 109
Joined: Mon Feb 10, 2014 9:56 pm
Location: Sykesville,md.

Re: Replicas

Post: # 32535Unread post Snakeheadfishlab
Fri Dec 05, 2014 10:04 pm

Rolandjays,I want one when you get ready to sell!


Sent from my iPad using Tapatalk

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Replicas

Post: # 32538Unread post ROLANDJAYS
Fri Dec 05, 2014 10:56 pm

I would estimate after Xmas both should be available ........ I update the board

User avatar
Snakeheadfishlab
Posts: 109
Joined: Mon Feb 10, 2014 9:56 pm
Location: Sykesville,md.

Re: Replicas

Post: # 32546Unread post Snakeheadfishlab
Sat Dec 06, 2014 6:09 pm

You da man!


Sent from my iPad using Tapatalk

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Replicas

Post: # 32571Unread post ROLANDJAYS
Mon Dec 08, 2014 1:19 pm

Audax housing assembly
You do not have the required permissions to view the files attached to this post.

User avatar
Jccc
Posts: 376
Joined: Tue Nov 20, 2007 10:15 am
Location: San Diablo California
Contact:

Re: Replicas

Post: # 32672Unread post Jccc
Sat Dec 13, 2014 12:04 am

dude! This is awesome! If you ever get down to making a couple of the grampian heads i might be interested if the price is reasonable.

Either way good work

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Replicas

Post: # 32673Unread post ROLANDJAYS
Sat Dec 13, 2014 1:39 am

cool , thanks for everyone who is interested.

im hope to finish all the parts this weekend, and then go to testing by next weekend.
the Grampians look like they will be finished first, then Audax come next year I would say.

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Replicas

Post: # 32680Unread post ROLANDJAYS
Sun Dec 14, 2014 1:02 am

Lower part of Grampian
You do not have the required permissions to view the files attached to this post.

User avatar
inspector77
Posts: 78
Joined: Mon Nov 17, 2014 10:59 am
Location: Málaga - Spain
Contact:

Re: Replicas

Post: # 32690Unread post inspector77
Mon Dec 15, 2014 7:52 am

What do you will use for magnetics??

User avatar
studiorp
Posts: 761
Joined: Thu Nov 01, 2007 6:55 pm

Re: Replicas

Post: # 32691Unread post studiorp
Mon Dec 15, 2014 7:54 am

When will be ready the first replica working ? And then when you will sell these heads ?

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Replicas

Post: # 32692Unread post ROLANDJAYS
Mon Dec 15, 2014 11:40 am

Magnets? I picked out some neodymiums .
I should have 1 working in another week...
If every thing is perfect first time ( usually never is ) then I will have a handful of these to sell in the beginning of January.

User avatar
ROLANDJAYS
Posts: 287
Joined: Sun Apr 14, 2013 3:48 am

Re: Replicas

Post: # 32696Unread post ROLANDJAYS
Mon Dec 15, 2014 11:30 pm

Magnet , Eddie currents, and steel holder assembly finished
You do not have the required permissions to view the files attached to this post.

Post Reply