Who can help me with my VR T560 cutterhead?

Anything goes! Inventors! Artists! Cutting edge solutions to old problems. But also non-commercial usage of record cutting. Cost- effective, cost-ineffective, nutso, brilliant, terribly fabulous and sometimes fabulously terrible ideas.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
EpicenterBryan
Posts: 738
Joined: Sun Aug 10, 2014 9:01 pm
Location: Eugene, OR USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 41670Unread post EpicenterBryan
Wed Mar 30, 2016 12:30 am

Snug Music wrote:looks like an apollo 11 Spacecraft...loool :D
That's it!
scotty.jpg
You do not have the required permissions to view the files attached to this post.
Top

Click Here!

User avatar
EpicenterBryan
Posts: 738
Joined: Sun Aug 10, 2014 9:01 pm
Location: Eugene, OR USA

Re: Who can help me with my VR T560 cutterhead?

Post: # 41671Unread post EpicenterBryan
Wed Mar 30, 2016 12:31 am

Snug Music wrote:our selfmade custom blanks
Those are AWESOME!
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41673Unread post Snug Music
Wed Mar 30, 2016 2:13 am

EpicenterBryan wrote:
Snug Music wrote:looks like an apollo 11 Spacecraft...loool :D
That's it!
scotty.jpg

Hehee thx Bryan,...thats so funny...hihiiii :mrgreen: :mrgreen: :mrgreen: :lol:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41675Unread post sakuszi
Wed Mar 30, 2016 7:49 am

24kHz ! 0dB 4"clock and bells SUPER ! PC only 20kHz
https://www.youtube.com/watch?v=EDqXiWC8j7k&feature=youtu.be
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41676Unread post sakuszi
Wed Mar 30, 2016 8:37 am

cam microphone https://www.youtube.com/watch?v=TNPL9intdLA&feature=youtu.be
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41677Unread post Snug Music
Wed Mar 30, 2016 8:42 am

EpicenterBryan wrote:
Snug Music wrote:our selfmade custom blanks
Those are AWESOME!
Thanks Bryan...

here is a Beer for you... :mrgreen: :mrgreen:
beer for bryan.jpg
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41678Unread post sakuszi
Wed Mar 30, 2016 8:52 am

pain in the a..s :mrgreen: :mrgreen: 8) https://www.youtube.com/watch?v=EDqXiWC8j7k&feature=youtu.be :roll: :lol:
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41680Unread post Snug Music
Wed Mar 30, 2016 10:12 am



hey Saku, ..
One can imagine it, but did not realize! Do a better photo with a higher resolution!
Yes the sound is clear and brilliant over! I think we have achieved a breakthrough in terms of heights! First test was extremely successful in the measurement! 8) 8) 8)

best regards

Scotty 8) :wink:
New Headdesign.jpg
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41711Unread post sakuszi
Thu Mar 31, 2016 5:31 pm

gentlemen! yesterday reached a stereo effect, it is very, very difficult to realize! The head must be very, very precise! In another case, the stereo effect will not be heard!
Now I wonder about whether it is worth doing stereo heads ... or better to make heads mono, it's not a joke, a very difficult thing with this stereo.
Now I know why the stereo heads are very expensive because they cost up to 10 k $. Primitive is stereophony for $ 50, [made head for the car speakers for $ 50 a set, etc.]. It is only suitable for amateur recordings only, more for fun, never for professional mastering.
Today, I'll record from my newest head [amateur], the true stereophony, but very very far yet ..... :roll: :roll: :|
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41715Unread post Snug Music
Thu Mar 31, 2016 6:54 pm

sakuszi wrote:gentlemen! yesterday reached a stereo effect...
Now I wonder about whether it is worth doing stereo heads ...
...expensive because they cost up to 10 k $. Primitive is stereophony for $ 50, [made head for the car speakers for $ 50 a set, etc.]. It is only suitable for amateur recordings only, more for fun, never for professional mastering.
Today, I'll record from my newest head [amateur], the true stereophony, but very very far yet ..... :roll: :roll: :|

:lol: :lol: :mrgreen: :mrgreen:
WRONG


Hey Saku .. it also has not said that it is easy. But on the contrary!!!
But unfortunately I have you here once disabuse.
If one works very well (you have the Centering absolutely do exactly!), Then you can also reach a good stereo effect! I have days to align the driver properly!
But we did it!
And this with (car tweeters !!!)
Also important is the exact geometry and the whole fine-tuning.
Thats it!
Fact: Precise operation and to reach his goal !!!

BTW:

It is indeed never reach the quality of a Neumann machine !!!
But otherwise pretty good (Professional recording) with a lot of power on vinyl!
We compare our vinyl recordings (by volume) in part with those of Bush Records.
And these disks are extremely loud!
But we're getting close !!!

Best regards

Scotty 8) :wink: :mrgreen:
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41716Unread post Snug Music
Thu Mar 31, 2016 7:11 pm

Look at here...

:mrgreen: :mrgreen:

8) :wink: :twisted: :twisted: :twisted:
TestCut_Snug1.jpg
TestCut_Snug2.jpg
TestCut_Snug3.jpg
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41727Unread post sakuszi
Fri Apr 01, 2016 5:59 pm

https://www.youtube.com/watch?v=Eg32bynVLA8&feature=youtu.be
Real test cutter head stereo separation L R . 1000 Hz / 20 kHz 0dB , is it a scam?
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41730Unread post sakuszi
Fri Apr 01, 2016 6:32 pm

it's something [my work] do not call up the lathe, because my vomiting collects, but records quite nicely, I think it is necessary equipment for $ 100k, it is important to understand what is going on
You do not have the required permissions to view the files attached to this post.
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41731Unread post sakuszi
Fri Apr 01, 2016 6:34 pm

my work :mrgreen:
You do not have the required permissions to view the files attached to this post.
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41732Unread post sakuszi
Fri Apr 01, 2016 6:37 pm

:mrgreen: I
You do not have the required permissions to view the files attached to this post.
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41733Unread post sakuszi
Fri Apr 01, 2016 6:47 pm

It also works flawlessly, automatic control :mrgreen:
There's nothing for free :mrgreen:
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41734Unread post Snug Music
Fri Apr 01, 2016 6:50 pm

TestCut at Polystyrol ( without Heat only Suction Unit )

:twisted: 8) :wink:
This with new Head and new Car-Tweeter :mrgreen: :mrgreen:

best Regards
Scotty 8) :wink:

her´s a Snipet.....
SnugMusikTestcut_02042016.mp3
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41735Unread post sakuszi
Fri Apr 01, 2016 6:55 pm

This is 10 units, very similar :mrgreen:
You do not have the required permissions to view the files attached to this post.
Top
User avatar
sakuszi
Posts: 302
Joined: Sat Nov 14, 2015 1:09 am

Re: Who can help me with my VR T560 cutterhead?

Post: # 41736Unread post sakuszi
Fri Apr 01, 2016 6:59 pm

Snug Music nice ! mp3 music selectively treats, but it is easier to record, less quantum information :mrgreen: 8)
Top
User avatar
Snug Music
Posts: 299
Joined: Sat Aug 15, 2015 5:23 pm
Location: 28816 Stuhr / Moordeich LK Diepholz

Re: Who can help me with my VR T560 cutterhead?

Post: # 41737Unread post Snug Music
Fri Apr 01, 2016 7:22 pm

sakuszi wrote:Snug Music nice ! mp3 music selectively treats, but it is easier to record, less quantum information :mrgreen: 8)
wav files go here not, therefore, mp3 high definition!
Do again a recording on vinyl, which are even fatter than polystyrene!
Since I am with the performance to almost + 12db

But here are some impressions of our Lathe with hubcaps-Head ... laughing :mrgreen:

her is it... 8) :wink:
20160402_010446.jpg
20160402_010404.jpg
20160402_010312.jpg
You do not have the required permissions to view the files attached to this post.
I'm still not a professional, but I learn pretty fast. especially with my eyes and ears!
Top
Post Reply

Click Here!