Looking for some short run Lathe Cut discs
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Looking for some short run Lathe Cut discs
Not looking for quality whatsoever! Will be fine with a rek-o-kut or anything
Looking for someone to do a short run of 10” lathe cut discs
20-30 Pieces total.
Looking for a decent price. This will be used for a noise band
Thanks!
Looking for someone to do a short run of 10” lathe cut discs
20-30 Pieces total.
Looking for a decent price. This will be used for a noise band
Thanks!
- trailerparkjesus
- Posts: 207
- Joined: Fri Mar 03, 2017 4:55 pm
Re: Looking for some short run vinyl production
google search and you'll find dozens
Mikes got resources on his site lathecuts.com
Tyler is a pro audiogeography.com
There is a lot out there but these are two trusted sources
Mikes got resources on his site lathecuts.com
Tyler is a pro audiogeography.com
There is a lot out there but these are two trusted sources
Re: Looking for some short run Lathe Cut discs
im actually looking for someone to cut me something specifically on a rek-o-kut or other "low end" machine
Re: Looking for some short run Lathe Cut discs
Lathecuts.com has two people that do this.
You are paying for time and materials, which are more or less the same regardless of equipment and experience (those are well worth the small upgrade you pay).
You are paying for time and materials, which are more or less the same regardless of equipment and experience (those are well worth the small upgrade you pay).
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Looking for some short run Lathe Cut discs
Im assuming you are the same person who posted an identical thread before, just under a different username. If so, nothing has changed.... There are at least 10 different folks that are easy to find online who “do this in their bedrooms” and have pricing on their sites, so im guessing that they all charge more than you want to pay.
Why dont you just post what you are willing to pay for 10”s and folks can contact you if they are willing to do it for that.
Why dont you just post what you are willing to pay for 10”s and folks can contact you if they are willing to do it for that.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Looking for some short run Lathe Cut discs
Just to get you going so you will stop posting the same thread over and over again...
Tony from Lancaster Lathe Cuts is doing a special for double sided round 7”s for $4 each, which is so freaking cheap i cant even fathom how he does it and even breaks even ln materials. You should contact him. If he is too expensive, then you need to accept that what you want at the price that you want to pay is not acheivable in this universe.
https://m.facebook.com/Lancasterlathecuts/
Tony from Lancaster Lathe Cuts is doing a special for double sided round 7”s for $4 each, which is so freaking cheap i cant even fathom how he does it and even breaks even ln materials. You should contact him. If he is too expensive, then you need to accept that what you want at the price that you want to pay is not acheivable in this universe.
https://m.facebook.com/Lancasterlathecuts/
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Looking for some short run Lathe Cut discs
what? I am not under a different name? This is my first post ever on this site haha
Re: Looking for some short run Lathe Cut discs
And im not worried about prices?
I assume someone else recently has asked about this and you assume it's me?
But I am genuinely looking for a low-quality cut for the sake of it being low quality
we are looking to make noise music and use these for live shows.
I assume someone else recently has asked about this and you assume it's me?
But I am genuinely looking for a low-quality cut for the sake of it being low quality
we are looking to make noise music and use these for live shows.
Re: Looking for some short run Lathe Cut discs
Yes. Another guy that phrased things very similarly to you was given plenty of links to people who did what he wanted but for some reason (he wouldnt specify why so that anyone could actually help him resolve the disconnect), he didnt want to use any of the people that were linked. So he started an identical thread and got pissed when i combined the two. https://www.lathetrolls.com/viewtopic.php?f=1&t=8304&p=53569&hilit=Combine+threads#p53569
ANYWAY if that isnt you, then I apologize.
All of the folks linked in this and that thread can do what you want.
If you specifically want the records to sound shittier than your master, just tell the person and im sure they can make it happen.
ANYWAY if that isnt you, then I apologize.
All of the folks linked in this and that thread can do what you want.
If you specifically want the records to sound shittier than your master, just tell the person and im sure they can make it happen.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Looking for some short run Lathe Cut discs
I will do clear 10”s, 10 min per side, for $14 each, min 20. Add labels for $1, make it black or white discs for $2 each.
And i can probably turn them in about 2 weeks.
And i can probably turn them in about 2 weeks.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com