Presto K8 or K10

Topics regarding professional record cutting.

Moderators: piaptk, mossboss, tragwag, Aussie0zborn, Steve E., Simon

Presto K8 or K10

Unread postby Voxster1965 » Sat Jun 25, 2016 11:06 am

So my beautiful K10 screw is an inside out - can any of you fine people supply me with an outside in?
Voxster1965
 
Posts: 46
Joined: Tue Apr 21, 2015 11:38 pm


Re: Presto K8 or K10

Unread postby rsimms3 » Sat Jun 25, 2016 1:44 pm

Just to be clear, you're talking about the cog that goes on the platter stem, correct? Yours only came with the one cog?
rsimms3
 
Posts: 329
Joined: Thu Mar 14, 2013 10:01 am

Re: Presto K8 or K10

Unread postby Voxster1965 » Tue Jun 28, 2016 5:28 am

This is correct rsimms3
Voxster1965
 
Posts: 46
Joined: Tue Apr 21, 2015 11:38 pm

Re: Presto K8 or K10

Unread postby Snakeheadfishlab » Tue Jun 28, 2016 6:09 pm

When you open the k8 the outside in screw is clipped to the underside of where the turntable platter is


Sent from my iPad using Tapatalk
Snakeheadfishlab
 
Posts: 109
Joined: Mon Feb 10, 2014 10:56 pm
Location: Sykesville,md.

Re: Presto K8 or K10

Unread postby rsimms3 » Tue Jun 28, 2016 7:28 pm

Voxster1965 wrote:This is correct rsimms3


Good luck, hopefully someone here has one. In the past few years I've been watching eBay I've never seen the cogs for sale by themselves and about half of the K10 units that I've seen have been missing 1 or more of them. Some folks don't know what they are and with them being brittle I'm sure some were ruined and thrown out.
rsimms3
 
Posts: 329
Joined: Thu Mar 14, 2013 10:01 am

Re: Presto K8 or K10

Unread postby Gridlock » Wed Jun 29, 2016 2:56 am

Oh jeez...that sucks. flip the motor upside down (might be tricky) and flip your needle backwards and adjust the angle backwards and play all your recorded music backwards and BOOM! Back in business. No seriously if you sucessfully do all that i will personally deliver joana to your doorstep.
<\\\\\\\\\\\\\\\\\\\\\[[[[[[[\/]]]]]]]\\\\\\\\\\\\\\\\\>
Recordette Sr.......Presto K-8
Gridlock
 
Posts: 184
Joined: Tue Jun 21, 2011 6:41 pm
Location: eugene oregon

Re: Presto K8 or K10

Unread postby Voxster1965 » Wed Jun 29, 2016 9:34 pm

lol - many thanks Gridlock - even that prize is worth the hassle ;)
Voxster1965
 
Posts: 46
Joined: Tue Apr 21, 2015 11:38 pm


Return to Vinyl Mastering, Lacquer cutting, Pro's and others

Who is online

Users browsing this forum: No registered users and 2 guests