Inside-Out Cuts

Once you have cut a master laquer, you have metal stampers created and have records pressed from them. Discuss manufacturing here. (Record Matrix Electroforming- Plating, Vinyl Record Pressing.)

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
antipenultimate
Posts: 1
Joined: Thu Aug 18, 2016 4:13 am

Inside-Out Cuts

Post: # 44083Unread post antipenultimate
Thu Sep 22, 2016 2:46 am

I was wondering if there is anyone is aware of anyone currently cutting with inverted grooves, ie: where the record plays from inside, near the label to the outside of the record.

Edit : the term is "inside-out" cuts. -Aussie.

User avatar
Gridlock
Posts: 286
Joined: Tue Jun 21, 2011 6:41 pm
Location: eugene oregon

Re: inverted grooves

Post: # 44084Unread post Gridlock
Thu Sep 22, 2016 5:12 am

Maybe we need a list of disk cutters with this option. Presto k series, maybe j series? Not sure about the presto overhead models. Neumann scully and haeco im sure. Fairchild probably not? Im not an expert
<\\\\\\\\\\\\\\\\\\\\\[[[[[[[\/]]]]]]]\\\\\\\\\\\\\\\\\>
Recordette Sr.......Presto K-8

User avatar
Aussie0zborn
Posts: 1822
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:

Re: Inside-Out Cuts

Post: # 44093Unread post Aussie0zborn
Fri Sep 23, 2016 6:24 pm

Some Scully lathes - yes.

User avatar
rsimms3
Posts: 427
Joined: Thu Mar 14, 2013 10:01 am

Re: Inside-Out Cuts

Post: # 44095Unread post rsimms3
Sat Sep 24, 2016 5:58 pm

Any of the Presto overhead machines could cut inside out with the correct feedscrew. I think all the console Presto models with fixed feedscrews could cut both ways also. Some (most/all?) of the Fairchild models could be switched in the gear box to reverse direction to cut inside out as well.

Fairchild
Image

User avatar
Voxster1965
Posts: 81
Joined: Tue Apr 21, 2015 11:38 pm

Re: Inside-Out Cuts

Post: # 44096Unread post Voxster1965
Sun Sep 25, 2016 12:51 am

I have a Presto K-10 with both outside-in and inside-out feed screws. Inside-out is less problematic in relation to swarf management.

User avatar
drdub
Posts: 239
Joined: Mon Nov 28, 2005 11:43 am
Location: AUSTRIA
Contact:

Re: Inside-Out Cuts

Post: # 44125Unread post drdub
Tue Sep 27, 2016 3:18 am

we do that a lot on souri's machine.
cheers mex
satan spins vinyl

*** www.drdub.com ***

User avatar
misjah
Posts: 223
Joined: Thu Jan 20, 2011 1:42 pm
Contact:

Re: Inside-Out Cuts

Post: # 44486Unread post misjah
Mon Oct 24, 2016 4:29 am

I do too

Post Reply