Hello
I just receive tests press with very loudpre and post echo
Space between grooves is 20 uM or more
any similar experiences ?
Post and pre echo
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- Aussie0zborn
- Posts: 1825
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
It is loud , let say than it goes to + 3 VU meter
cutted from digital ..
plating bath too hot ... yes ,. it can be that , but I can t know the temperature of the bath ...
it is not the first time I have this problem , I never had it during test cut ...
So I can think than it does not come from the cut in itself ...
I don t see other solution than using more " land " between each groove , but 20 micro meter ias already a lot ..
And I don t have those post and pre echo if I listen to the laquer
cutted from digital ..
plating bath too hot ... yes ,. it can be that , but I can t know the temperature of the bath ...
it is not the first time I have this problem , I never had it during test cut ...
So I can think than it does not come from the cut in itself ...
I don t see other solution than using more " land " between each groove , but 20 micro meter ias already a lot ..
And I don t have those post and pre echo if I listen to the laquer
- Angus McCarthy
- Posts: 760
- Joined: Mon Aug 23, 2010 6:22 pm
- Location: Bloomsburg, PA, USA