Blanks..

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
David34
Posts: 215
Joined: Sat Dec 14, 2013 6:12 pm

Blanks..

Post: # 60319Unread post David34
Thu Feb 24, 2022 8:28 pm

Hello all..

After some serious ground work, I have sourced blanks in 2mm.

We can get black 12", 7" in 2mm with protective film. We will need to place order for bulk.

Question is - who will use these blanks if we can supply? Obviously we would be competitive on the other stores.
Top

Click Here!

User avatar
Dogtemple
Posts: 68
Joined: Mon Feb 21, 2011 7:14 pm
Location: Sussex, UK

Re: Blanks..

Post: # 60320Unread post Dogtemple
Fri Feb 25, 2022 12:22 pm

Good work but what type of blanks are they?
Top
User avatar
David34
Posts: 215
Joined: Sat Dec 14, 2013 6:12 pm

Re: Blanks..

Post: # 60326Unread post David34
Sun Feb 27, 2022 12:07 am

Vinyl blanks suitable for T560 and possibly other cutters... .I am getting a sample sent so will post some pics/vids.
Top
User avatar
Dogtemple
Posts: 68
Joined: Mon Feb 21, 2011 7:14 pm
Location: Sussex, UK

Re: Blanks..

Post: # 60327Unread post Dogtemple
Sun Feb 27, 2022 4:34 am

Petg?
Top
User avatar
soeffingodly
Posts: 273
Joined: Fri Jan 19, 2018 8:48 am
Location: Florida, USA

Re: Blanks..

Post: # 60346Unread post soeffingodly
Tue Mar 01, 2022 9:50 am

I'd be interested if it's PETG.
"I wasn't lying. Things I said later seemed untrue."
Top
User avatar
e3sa934
Posts: 28
Joined: Wed Nov 15, 2017 3:16 am
Location: UK

Re: Blanks..

Post: # 60355Unread post e3sa934
Thu Mar 03, 2022 8:43 am

is the supplier in the UK, EU or elsewhere?
Top
User avatar
Tony
Posts: 9
Joined: Sun Apr 04, 2021 4:14 am

Re: Blanks..

Post: # 60391Unread post Tony
Sun Mar 06, 2022 7:56 pm

If it's Europe then I would be interested. We are not exactly spoiled for choice. I don't think you would have trouble undercutting them if you'll pardon the phrase...
Top
User avatar
PLD
Posts: 29
Joined: Wed Apr 15, 2020 3:50 pm

Re: Blanks..

Post: # 60405Unread post PLD
Mon Mar 07, 2022 12:44 pm

Australia, I'm guessing from previous postings...
Top
User avatar
David34
Posts: 215
Joined: Sat Dec 14, 2013 6:12 pm

Re: Blanks..

Post: # 60423Unread post David34
Sat Mar 12, 2022 4:28 am

Australia..
Top
User avatar
David34
Posts: 215
Joined: Sat Dec 14, 2013 6:12 pm

Re: Blanks..

Post: # 60496Unread post David34
Tue Mar 29, 2022 5:10 am

Just an update - the Chinese blanks had too much surface noise, so I am back to the drawing board with this.

I will get somewhere - I am determined.
Top
Post Reply

Click Here!