A New Source for Blank Records
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: A New Source for Blank Records
sounds good ill keep an eye out for the mail lady
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: A New Source for Blank Records
Got my order I'll try em out tomorow and see what's up thanks again
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
- Oldskoolhousehead
- Posts: 33
- Joined: Mon Feb 08, 2016 3:03 pm
Re: A New Source for Blank Records
It would be great if you supplied solid and translucent colored blanks.
- soeffingodly
- Posts: 273
- Joined: Fri Jan 19, 2018 8:48 am
- Location: Florida, USA
Re: A New Source for Blank Records
These blanks work pretty dam well!
A bit more surface noise than traditional poly but I used the 2 blanks with Mikes sapphires and they sounded good. Definitely a viable solution in the states. Well done.
A bit more surface noise than traditional poly but I used the 2 blanks with Mikes sapphires and they sounded good. Definitely a viable solution in the states. Well done.
"I wasn't lying. Things I said later seemed untrue."
Re: A New Source for Blank Records
Still wondering how they work with diamonds. Anyone try it yet?
Re: A New Source for Blank Records
Glad you got some good results! Blanqs are softer than poly, so you might need to back your weight off just a touch, and that surface noise you mentioned should be cleared up. We use Mike's cones at Leesta Vall as well, and are getting almost no surface noise at all. Take a listen to a few cuts we've posted on our IG Story here: https://www.instagram.com/stories/highlights/17915283718143732/soeffingodly wrote:These blanks work pretty dam well!
A bit more surface noise than traditional poly but I used the 2 blanks with Mikes sapphires and they sounded good. Definitely a viable solution in the states. Well done.
- soeffingodly
- Posts: 273
- Joined: Fri Jan 19, 2018 8:48 am
- Location: Florida, USA
Re: A New Source for Blank Records
I only had 2 so I didn't get a chance to really mess with dialing them in but they definitely cut well!BLANQ wrote:Glad you got some good results! Blanqs are softer than poly, so you might need to back your weight off just a touch, and that surface noise you mentioned should be cleared up. We use Mike's cones at Leesta Vall as well, and are getting almost no surface noise at all. Take a listen to a few cuts we've posted on our IG Story here: https://www.instagram.com/stories/highlights/17915283718143732/soeffingodly wrote:These blanks work pretty dam well!
A bit more surface noise than traditional poly but I used the 2 blanks with Mikes sapphires and they sounded good. Definitely a viable solution in the states. Well done.
Thanks for the tips!
"I wasn't lying. Things I said later seemed untrue."
Re: A New Source for Blank Records
I tried cutting these with a diamond, worked great! Swarf looked the same as Myshank blanks, and noise floor seemed the same. Good job!
Re: A New Source for Blank Records
Wonderful news, thanks Aaron!aaron wrote:I tried cutting these with a diamond, worked great! Swarf looked the same as Myshank blanks, and noise floor seemed the same. Good job!
Re: A New Source for Blank Records
Just to be fair, my method was totally not scientific and I compared to a black Myshank blank. Also, I have no idea of stylus life.
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: A New Source for Blank Records
These are fantastic for embossing
https://youtu.be/scqRogHMrQI
https://youtu.be/scqRogHMrQI
Instagram @styluspressurerecords
Re: A New Source for Blank Records
Any update on blank or different colour blanqs?
Re: A New Source for Blank Records
If you are embossing, I sell White, Black, Smokey Grey and Translucent Blue polycarb. They are no good for diamond cutting, though.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
- kafkablues
- Posts: 48
- Joined: Mon Feb 22, 2016 7:13 am
Re: A New Source for Blank Records
Have I missed the boat on these free samples?