Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
slant1332
Posts: 42
Joined: Sat Mar 02, 2013 11:27 am

Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 25951Unread post slant1332
Wed Jun 12, 2013 9:55 pm

20130612_152318.jpg
THIS is an update to my post few months back,REK-O-KUT PROJECT NOT GOING SO GOOD. https://lathetrolls.com/viewtopic.php?f=1&t=4033
20130612_151909.jpg
FINALLY,after a disastrous start on my recently purchased rek-o-kut lathe. Had my FRIED AUDAX cutter head refurbished,re-wound.
Had the Amp overhauled with 2new transformers, caps,tubes,..etc.
pictures ...

after contacting Gibb with my issues, it seemed he did not care or was to busy. whatever the reason, i just moved on...
I took a chance on someone who i didnt know...(SCOTT MITCHELL )saw his classified on ebay for REK-O-KUT LATHE REPAIR.
TURNS out he is a stand up guy down in florida.. fair ,straight up and honest.
i sent him my amp portion and my head...burnt up and in a total mess.
he gave me daily updates on progress ,parts needed with price, ....etc.
all in all it took about 3 and a half weeks ....mostly waiting on parts ordered.
..he may not be a lathe troll but he does know his stuff.
i gave him a generous tip thru paypal ..and he returned it..too much he says..
thats fucking character.
Cheers everybody, im ready to cut some lo-fi mono!!
You do not have the required permissions to view the files attached to this post.
Top

Click Here!

User avatar
slant1332
Posts: 42
Joined: Sat Mar 02, 2013 11:27 am

Re: Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 25952Unread post slant1332
Wed Jun 12, 2013 9:59 pm

more pics
You do not have the required permissions to view the files attached to this post.
Top
User avatar
slant1332
Posts: 42
Joined: Sat Mar 02, 2013 11:27 am

Re: Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 25953Unread post slant1332
Wed Jun 12, 2013 10:54 pm

first cut....
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Steve E.
Site Admin
Posts: 1918
Joined: Fri Jun 24, 2005 3:24 pm
Location: Brooklyn, New York, USA
Contact:
Contact Steve E.

Re: Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 25956Unread post Steve E.
Wed Jun 12, 2013 11:49 pm

slant1332 wrote:
20130612_152318.jpg
I took a chance on someone who i didnt know...(SCOTT MITCHELL )saw his classified on ebay for REK-O-KUT LATHE REPAIR.
TURNS out he is a stand up guy down in florida.. fair ,straight up and honest.
i sent him my amp portion and my head...burnt up and in a total mess.
he gave me daily updates on progress ,parts needed with price, ....etc.
all in all it took about 3 and a half weeks ....mostly waiting on parts ordered.
..he may not be a lathe troll but he does know his stuff.
i gave him a generous tip thru paypal ..and he returned it..too much he says..
thats fucking character.
Cheers everybody, im ready to cut some lo-fi mono!!
Actually, this is our new member masterscott1. Nice!!
Top
User avatar
slant1332
Posts: 42
Joined: Sat Mar 02, 2013 11:27 am

Re: Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 25962Unread post slant1332
Thu Jun 13, 2013 5:26 am

yes steve you correct, i probly should of said he not a "forum" type guy...i told him he should check this place out for "repair work".
i must admit he does really good coil winding/cutter restoration.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Angus McCarthy
Posts: 760
Joined: Mon Aug 23, 2010 6:22 pm
Location: Bloomsburg, PA, USA

Re: Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 26131Unread post Angus McCarthy
Sat Jun 22, 2013 5:35 pm

I may have to shoot him a message.
Top
User avatar
slant1332
Posts: 42
Joined: Sat Mar 02, 2013 11:27 am

Re: Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 26146Unread post slant1332
Tue Jun 25, 2013 12:57 am

i do highly recommend masterscott1.. with so few providing this specialty service.. why not?..btw after wasting 10 blanks and countless adjustments, i think my rek-o-kut is finally cutting some really good sounding grooves. thanks to this forum and helpful trolls...im on my way to a good start! thx. bucket list #16 ...check. :)
Top
User avatar
Cubed
Posts: 69
Joined: Wed Aug 08, 2012 2:38 pm
Location: Miami, Fl

Re: Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 27339Unread post Cubed
Thu Oct 03, 2013 10:26 am

Thanks for the pics, I got a presto head MFG by Audak redone by him and masterscott1 is great! It was in bad shape when it came off my presto K8 was worried to send it to someone "random". He kept me informed of the process and gave me a few pointers as this is my first head and lathe.

I asked him to restore it and he did it all, paint, coil rewinding, and remagnetizing. I was really happy with his service, infact, I sent out my 2 other heads that just got to him. I did bother to test it as I know and can hear he does a good job. Very honest and polite. I would recommend Scott to anyone.
Top
User avatar
slant1332
Posts: 42
Joined: Sat Mar 02, 2013 11:27 am

Re: Rek-o-Kut n̶o̶t̶ ̶g̶o̶i̶n̶g̶ ̶s̶o̶ ̶g̶o̶o̶d̶. UPDATE

Post: # 27371Unread post slant1332
Tue Oct 08, 2013 2:50 am

sweet! thats 2 for 2 ...happy customers..!
Top
Post Reply

Click Here!