Styli
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Styli
So, who are the suppliers of styli? Apollo for sure, but is anyone else hip to others making styli, specifically for a VMS-70?
Re: Styli
I have Diamond styli for Neumann SX cutterheads.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Styli
Yes, they are heated to cut into a lacquer. I've been a fan of the ruby styli from apollo, but I've received a few bad ones recently & am just curious if there is another supplier out there. Specifically, I was ordering the 320.
Re: Styli
My diamonds are for cutting plastic. They do have a heating wire.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Re: Styli
I'm cutting lacquers. The sound of the ruby 320's is killer on my lathe, but I'm nervous about ordering them currently because of the large amount of poorly manufactured ones I've received. I'm just curious if any other manufacturers are out there. I guess I'll just keep ordering 4 or 5 of them at a time and hope that at least 1 or maybe 2 are acceptable.
Re: Styli
Other than Apollo I know of no other source than New Old Stock that you see sometimes on eBay. I really don't have the issues with Apollo 320 styli that you seem to be having. Can you be more specific about what the issue is?
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
- dietrich10
- Posts: 842
- Joined: Wed Jan 16, 2008 2:18 pm
- Location: usa
- Contact:
Re: Styli
Sometimes I have issues with the glue on a 320 but Apollo always swaps
cutting lacquers-vms70 system
Re: Styli
The glue was the issue. All over the tip. That, and a couple of misshapen ones, and one that appeared to have no burnishing facets
Re: Styli
Oh well. Apollo was good about replacing them. It's just the waiting time for shipping that is kind of a bummer. I'll just have to keep a larger stock of them around. Oh well, such is life. Thanks for the input.
Re: Styli
To end on a positive, I got my replacement styli from Apollo, and they are all cutting great!
Re: Styli
I cant imagine the precision required to make those things. Every jeweler ive ever taken them to trying to get them resharpened either refused to to do it or wanted way more to resharpen them than it cost to buy them new. Apollo sells those basically at cost, just to keep the lacquer business going.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: Styli
Yeah, I figured as much. My goal wasn't to trash Apollo, as I'm sure they try very hard, and made it very easy to swap out when they could easily tell me to just eat that cost. I was just curious if anyone else was producing them and/or if others had the same experience I've been having lately.
- chris king
- Posts: 127
- Joined: Sat Mar 17, 2012 4:34 pm
Re: Styli
I have capps original new old stock for Neumann sx 68/74 £75 dollars each or $60 dollars each if bought in 10's
- chris king
- Posts: 127
- Joined: Sat Mar 17, 2012 4:34 pm
Re: Styli
I HAVE BEEN TOLD MY NOS STYLI HAVE BEEN MOUNTED IN A HEAD. I DONT KNOW IF THEY HAVE OR NOT BUT THEY HAVE NEVER CUT A SIDE BEFORE SO NOT TOO MISLEAD ANYONE THEY ARE NOT NEW OLD STOCK THERE JUST PERFECT CUTTING STYLI MADE BY CAPPS THAT MAY HAVE BEEN MOUNTED IN A HEAD TO BE INSPECTED??? OR SOMETHINGchris king wrote:I have capps original new old stock for Neumann sx 68/74 £75 dollars each or $60 dollars each if bought in 10's